Skip to content

Latest commit

 

History

History
1060 lines (604 loc) · 57.8 KB

readme.md

File metadata and controls

1060 lines (604 loc) · 57.8 KB
Raw

Getting started with Micro Focus Enterprise Developer for Eclipse (Linux)

Overview

This set of tutorials guides you through the use of Micro Focus Enterprise Developer for Eclipse. They provide a basic understanding of how the product operates.

These tutorials are designed for developers who have experience with developing COBOL on the mainframe but do not necessarily have a working knowledge of the Eclipse Integrated Development Environment (IDE). The tutorials provide a basic understanding of the features offered in Enterprise Developer for Eclipse to develop and maintain both simple COBOL and mainframe subsystem applications.

Other tutorials, which are designed for Administrators, are available.

Download the demonstration application

A preconfigured, fully executing application, Bankdemo, is available from the Micro Focus GitHub repository - click here. Download the sample's sources as follows:

  1. In the GitHub repository for the Bankdemo demonstration, click Releases in the right-hand side part of the page.

  2. In the list of releases, locate and click the one that corresponds to the Enterprise Developer product release you have installed.

  3. Expand the Assets section, and click either Source code (zip) or Source code (tar.gz) to download the archive with the sample's sources.

  4. Expand the archive on your machine.

    The demonstration application includes all the source files needed to run it. The application is both a batch and online application which assesses data on a fictitious bank system. The bank data is stored in VSAM files.

Important: Before attempting this tutorial, create a directory on your machine for the sample files - for example, create a MFETDUSER directory on your machine such as /home/username/MFETDUSER. Copy the entire contents from the expanded folder into the newly created directory. For example, you should have a /home/username/MFETDUSER/datafiles folder, etc.

As part of this tutorial, you use the supplied standard Eclipse COBOL project in the sample to set up a development environment for this application. The tutorial shows how you can:

  • Create a project for your application
  • Edit the source files
  • Compile the source code
  • Execute and debug the application

Prerequisites

You must have the following software installed:

  • Micro Focus Enterprise Developer for Eclipse (Linux). Click here to access the product Help and the release notes of Enterprise Developer.
  • A TN3270 terminal emulator to run the CICS application. This tutorial uses Micro Focus Host Access for the Cloud (HACloud), which is installed with Enterprise Developer, but you may use an alternative terminal emulator.

Using a remote enterprise server instance for the tutorials

If you have an active firewall on the machine that is running your Directory Server and enterprise server instances, and you want remote clients to be able to connect to them, you must ensure that the firewall allows access to the ports that you are using.

For example, Directory Server is configured, by default, to use port 86. Your must configure your firewall to allow TCP and UDP access to this port. Similarly, the enterprise server instance you create as part of this tutorial, BANKDEMO, has listeners which use ports 9003 and 9023. For remote clients to be able to submit JCL jobs or connect a TN3270 terminal to these listeners, your firewall must permit access to these ports.

We recommend that, if you want remote users to access Enterprise Server functionality through the firewall, you use fixed port values so that you can control access via these.

Enterprise Server security

In this release, the Enterprise Server security features are enabled by default. Tutorials that use enterprise server regions, however, assume that Enterprise Server security is not configured. To perform this tutorial without modification, you must disable the default configured Enterprise Server security. See To Disable the Default Enterprise Server Security Configuration for more information.

Disable the default Enterprise Server security configuration

Important: Micro Focus does not recommend disabling Enterprise Server security permanently. If you disable the default Enterprise Server security to facilitate running tutorials then this should be performed on a network isolated machine. Re-enable security as soon as possible after completing the tutorial. See To recreate the Default Enterprise Server Security Configuration in the product documentation for steps on how to re-enable security.

  1. In an Enterprise Developer command prompt, run the command DisableESDefaultSecurity.sh. You will see a series of messages as the script disables default security.
  2. Restart MFDS and ESCWA to pick up the configuration changes. You will now be able to use ESCWA without having to log in.
  3. Restart any running enterprise server regions to have them pick up the configuration changes. Regions will no longer require credentials for starting/stopping and other actions.

Starting the Eclipse Integrated Development Environment (IDE)

Back to Top

  1. Start Enterprise Developer for Eclipse from your Applications.

    This opens the Eclipse Launcher which enables you to choose a location for Eclipse to store your projects.

  2. Specify the workspace folder in the downloaded sample in the Workspace field, and click Launch. For example, /home/username/MFETDUSER/tutorial/workspace.

    If this is the first time you start Enterprise Developer, you are presented with the Eclipse Welcome page. Click Open Team Developer Perspective to close the Welcome page and see the main Eclipse window.

    If the Welcome page is not opened, click Window > Perspective > Open Perspective > Other, select the Team Developer (default), and click Open.

    The views you see open in Eclipse and their layout depend on whether you have used Eclipse before. You can move, resize and minimize views which is why they might not look exactly as described here. If this is the first time you have used Eclipse, you should see the following views in the IDE, although most of the views are currently empty:

    • The Application Explorer view in the upper left part of the IDE gives a logical view of your applications. You are going to use the Application Explorer view most of the time. This tree view should already display an Enterprise Developer system entry. If not, right-click in this view, select Add System(s) and then select ED System and click OK. This view now displays a system entry used to support the standard Enterprise Developer projects. Expand this system entry and an application entry named Enterprise Development Projects is displayed. Right-click this application entry and select Reload Application. If you are using this Eclipse workspace for the first time, there are no projects associated with this application.
    • The Properties, Outline, and Program Outline tabbed views in the bottom left part of the IDE provide more information about selected tree or table entries, and outline information on various types in your sources when you start editing COBOL or PL/I programs or JCL.
    • A series of tabbed views in the bottom right part of the IDE (Table Results view, Error Feedback view, Jobs view, File Mappings view, Console, Problems, Tasks) show for example sources in a table structure, the results of compiling and tasks.
    • The IDE provides a Server Explorer view, where you can view the underlying execution environment. This view is displayed as a tab in the upper left part of the IDE.
    • The Filter Definitions view in the upper right part of the IDE is used to manage search criteria within a loaded application.
    • The Remote Systems view is used to connect to the mainframe system z/OS and provides access to all mainframe resources like MVS or USS files and MVS jobs. This view is displayed as a tab in the upper right part of the IDE.
    • The main activity window in the top middle part of the IDE, the editor, is where you edit or debug the sources.
    • Apart from the Eclipse menus, there are a number of buttons on the toolbar, which vary depending on what you are currently doing with Eclipse.

  3. Experiment with resizing, minimizing and restoring the views.

  4. If you close a view, click Window > Show View > View Name to restore it.

  5. At any time, you can reset the complete layout of the Team Developer Perspective to its default using Window > Perspective > Reset Perspective.

Connect to the default ESCWA server

Ensure that Server Explorer contains a connection to the default Enterprise Server Common Web Administration (ESCWA) server. Note that existing workspaces may already have this connection.

  1. In the Server Explorer view, right-click and select New > Enterprise Server Common Web Administration Connection.

    The New Enterprise Server Common Web Administration Connection dialog box is displayed.

  2. In the Name field, type Local.

  3. In the Server address field, type localhost.

  4. In the Server port field, leave as the default 10086.

  5. If the server connection is TLS-enabled, select TLS Enabled, and then click Browse and select the appropriate certificate.

Note: If TLS Enabled is selected, but you do not specify a certificate, the default Java keystore is searched for a valid one.

  1. Click Finish. The new ESCWA connection is displayed at the top level, in the Server Explorer.

Creating a Project and Adding the Source Files

Back to Top

You are going to use the project supplied with the Bankdemo sample as a template to create a project for this demonstration. You will then add the source files to the projects to be able to build, develop, and test the application.

The source files of the demonstration application are stored in subfolders named after the file type (for example, bms, cobol, copybook, jcl) in the /home/username/MFETDUSER/sources directory. The data files are in /home/username/MFETDUSER/datafiles.

Creating the project for the Bankdemo application

You use the Bankdemo project supplied with the sample to create your project in the Eclipse workspace that has the same settings as the sample project:

  1. In the Application Explorer view, right-click Enterprise Development Projects, which is the node for the standard application.

  2. Click New COBOL Project > COBOL Project from Template.

  3. Click Retrieve next to Template Path.

  4. Browse to the /home/username/MFETDUSER/tutorial/projects/Eclipse/cobol/Bankdemo folder, and click Open.

  5. Type Bankdemo in the project name field, and click OK.

    This creates a copy of the Bankdemo project in your Eclipse workspace, and adds the project to the application in the Application Explorer view. If the Bankdemo project entry is not displayed in the tree view, refresh the Enterprise Development Projects entry.

  6. Expand the Bankdemo project in the Application Explorer view.

    The Bankdemo project

    Your project is pre-configured so that the build process creates the output files in a location that is used by the Enterprise Server logical server. To check which folder will include the built files:

    1. In the Application Explorer view, right-click the Bankdemo project, and click Properties.

    2. Expand Micro Focus, Build Configurations, and then click Link.

      The project comes with a predefined configuration called loadlib.

    3. Note that the Output path field points to the loadlib directory which will be created in the project directory at build time.

  7. You can cancel the project properties dialog box.

Adding the demo source files

In most cases, to add files to an Eclipse project, you use the Import command. This creates local copies of file sources in the workspace. Optionally, you can leave the source files in the original location and create links to them which is what you are going to do in this tutorial.

To add the sample's copybooks to the project:

  1. In Application Explorer view, right-click the Bankdemo project, and click New > Folder> Folder.

  2. Click Advanced, and check Link to alternate location (Linked Folder).

  3. Browse to /home/username/MFETDUSER/sources/copybook, and click Open.

  4. Click Finish.

    This adds the folder storing the copybooks to your project as linked resources.

    By default, Eclipse is set to build projects automatically (see Project > Build Automatically), so it immediately compiles the files you have just added.

To add the other source files to the Bankdemo project:

  1. In Application Explorer view, right-click the Bankdemo project, and click New > Folder> Folder.

  2. Click Advanced, and check Link to alternate location (Linked Folder).

  3. Browse to /home/username/MFETDUSER/sources/cobol, and click Open.

  4. Click Finish.

    This adds the folders storing the source files to your project as linked resources:

    By default, Eclipse is set to build projects automatically (see Project > Build Automatically), so it immediately compiles the files you have just added.

    Check the Console and Problems views and see that some of the programs failed to compile. In the Application Explorer view, you can select a program and check the error and warning count property in the Properties view to indicate that there are compilation problems.

    The errors are due to the correct copybook paths not being specified in the project's properties.

  5. Repeat the steps above to add the files from the /home/username/MFETDUSER/sources/bms, and the /home/username/MFETDUSER/sources/jcl folders as linked resources.

Specifying the Copybook Paths for the Bankdemo Project

Next, you need to specify the copybook paths for the project in order for the copybook dependencies to be resolved:

  1. In Application Explorer view, right-click the Bankdemo project, and click Properties.

  2. Expand Micro Focus, and then click Build Path.

  3. Click the Dependency Paths tab, and ensure Type is set to COBOL Copybook Paths.

  4. Enable the checkbox in front of Bankdemo/copybook.

  5. Click the Build Precedence tab, and click Deselect All in the right-hand side of the dialog box.

    You do not need to compile all source files for this demonstration so you only need to enable some of the folders on this page.

  6. Enable the checkboxes for the following folders:

    • Bankdemo/bms/cobol
    • Bankdemo/cobol/core
    • Bankdemo/cobol/data/vsam

  7. Click Apply and Close.

    Eclipse rebuilds the project. There are still a few issues that are reported.

Setting Compiler Directives

You now need to perform a scan of the COBOL programs in your project to determine and set the appropriate Compiler directives:

  1. Right-click the Bankdemo project, and click Determine Directives.

    The IDE performs a scan of the files and shows a report of which directives for dialect and for CICS must be set on the programs in your project in order for them to compile cleanly.

  2. Click OK to set the directives.

    If you are prompted to delete some user files, choose No.

    Setting the missing Compiler directives triggers a full rebuild of the project. The project should compile cleanly now.

Adding Data Files

The demonstration application includes a number of data files used. To see how you can edit data files, you only need to look at one of these files so you do not need to add a folder for it to the project.

To add the data file to your project:

  1. In the Application Explorer view, right-click the Bankdemo project, and click New > File > Other File.

  2. Click Advanced, and check Link to file in the file system.

  3. Browse to the /home/username/MFETDUSER/datafiles folder.

  4. Select MFI01V.MFIDEMO.BNKACC.dat, and then click Open.

  5. Click Finish.

    This adds the file to the Bankdemo project and also automatically opens it in the Micro Focus Data Files Tools utility. You can close the utility for now.

  6. Repeat steps 1 to 5 to add the MFI01V.MFIDEMO.BNKACC.str file to the project.

Summary

You created an Eclipse project and added references in it to the COBOL files, the copybooks, the BMS, and the JCL files of the demonstration program. Next, you are going to edit some of these source files.

Editing Source Files

Back to Top

This topic describes the editing features for the various file types (COBOL, JCL, IMS, BMS, and data files).

Important: We recommend that you create backup copies of all files before you start editing them.

Editing COBOL Files

You are going to explore some of the COBOL editing features using the ZBNKPRT1.cbl program which produces a report from a sequential data file.

  1. In the Application Explorer view, double-click ZBNKPRT1.cbl in the cobol/core folder of the project.

    This opens the file in the COBOL editor in Eclipse. Next, you are going to enable the line numbers in the editor.

  2. Click Window > Preferences to open the Eclipse preferences.

  3. Expand General > Editors and click Text Editors.

  4. Check Show Line Numbers, and click Apply and Close.

Copybooks

  1. Scroll down the file until you see some COPY statements. Click on line 58 for the COPY CTIMERD statement.

  2. Press F4 to open the file in COBOL Copy View, which shows the code of the copybooks expanded in source file.

    The COBOL Copy View is read-only and you cannot edit the code in it. The screen background changes from white to pale yellow.

  3. Press Ctrl+F4 to close the COBOL Copy View.

  4. To edit a copybook, position the cursor on the COPY statement and press F3 (Go To Definition). This opens the copybook file in a new tab in the editor.

Copybook Dependencies

By expanding a source file node in the Application Explorer view, you can see a list of all copybooks referenced in the source code, and nested within them any other copybooks referenced by those copybooks. Double-click a copybook to open it in the editor.

Use the Copybook Dependency view to show where in the source file's structure the COPY statements appear, and which copybooks they reference. If the Copybook Dependency view is not displayed in the Team Developer perspective, to open this view click Window > Show View > Other > Micro Focus > Copybook Dependency.

Click a copybook reference in the Copybook Dependency view to locate the associated COPY statemen the appropriate line in the source code.

Unused data

Notice that some data items in the Data Division are crossed out. This is because they are not referenc the Procedure Division.

Program outline

  1. Right-click anywhere in the COBOL editor, and select Quick Outline. This opens a pop-up with the outline of the program similar to what the Outline view shows.

  2. Press Ctrl+O in the pop-up to see a more detailed outline similar to the Program Outline view.

  3. Double-click an item in the outline to see how the cursor positions itself on the line of code that this outline item refers to.

  4. Click on the permanent Outline view.

  5. Expand and collapse various lines in the Outline view.

  6. Double-click items in the Outline view to see how the cursor positions itself on the respective line of that each one of these outline items refers to and highlights the referenced item in the editor window.

  7. Click (Sort) in the Outline view to toggle between a physical or alphabetical sequence.

Hyperlinks

  1. In the editor, scroll down the file to a line in the Procedure Division.

  2. Press and hold Ctrl and move your mouse around the code.

    This turns the data items and the paragraph names you hover over into hyperlinks.

  3. Click one of the hyperlinks to position the cursor on the definition of the respective data item or paragraph.

Viewing data definitions

Hover over a data item in the Procedure Division to see information about the data item and how ma times it is used in the program. Double-clicking a data item or paragraph name highlights all their occurrences in the code. |

Breadcrumbs

The (Toggle Context Breadcrumbs icon) in the toolbar lets you see another view of the program showing the copybooks.

  1. Click the icon to enable breadcrumbs. This opens a new toolbar in the editor with the name of your COBOL program.

  2. Click the arrow to the right of the program name to see a list of copybooks the program uses.

  3. Click one of these copybooks to load it in a new tab in the editor.

Marking text and block mode

You can either use the mouse to mark a block of text or click (Toggle Block Selection Mode) and s square blocks of text. When a selection is made, you can cut or copy it.

Rename

You can use rename refactoring to rename all occurrences of a variable:

  1. Scroll down to line 228 in the file.

  2. Click the WS-EXEC-PARM-LL data item, then right-click it, and click Refactor > Rename.

    A pop-up is displayed prompting you to enter a new name for the variable.

  3. Click the down arrow to show the context menu, and click Open Rename Dialog.

  4. Specify WS-EXEC-PARM-NEW as a New name in the dialog box and click Preview.

    This opens the Rename COBOL Element dialog box that enables you to preview and approve all changes.

  5. Click Cancel as you are not going to apply these changes for this demo.

You can change your Eclipse preferences and rename without the Rename COBOL Element dialog box. To do this, go to Window > Preferences > Micro Focus > COBOL > Editor and uncheck Rename in editor without dialog.

Smart editing

Next, we are going to look at the smart editing feature with background COBOL parsing. First you'll check the IDE preferences for suggestions that Content Assist offers you in the editor:

  1. Click Window > Preferences > Micro Focus > COBOL > Editor > Content Assist.

  2. Check Enable auto activation then click Apply and Close.

  3. Scroll down to line 258 in the code and start typing the following, starting in area A of the code, one character at a time:

    MOVE W TO

    Notice how the words you type change in the editor. Once a word is recognized as a reserved word or a data item, its color changes. If a line of code contains invalid COBOL syntax, a red cross appears to the left of the line and the word is underlined with a wavy red line.

    Also, Content Assist automatically displays a pop-up with suggested keywords and names of data items appears as you type.

  4. Change the line to:

    MOVE 34 TO WS-

    If the IDE preferences for auto-activation of Content Assist have not been changed, Content Assist opens a list of potential data names that start with WS- to choose from. If Content Assist does not display a list, to open it manually click Ctrl+Space.

  5. Finally, if you have changed this COBOL program, copy the backup version back in again.

Renumbering the COBOL sources

You can use the commands Renumber and Unnumber to insert and remove line numbers from your code.

If your sources include any comments beyond column 73, you need to configure the line numbering in order to ensure you only apply changes to the COBOL sequence area. Here's how you can do this:

  1. Click Window > Preferences > Micro Focus > COBOL > Editor > Line Numbering.
  2. Ensure that only the COBOL (left-hand margin) option is enabled.
  3. Click Apply and Close.

To insert the line numbers in your code:

  1. Right-click the ZBNKPRT1.cbl file in the editor, and click Source > Renumber. Alternatively, click in the Eclipse toolbar.

  2. Click Yes to confirm.

    This reinserts the line numbers from the COBOL sequence area.

You can now remove the line numbers from your code:

  1. Right-click the ZBNKPRT1.cbl file in the editor, and click Source > Unnumber. Alternatively, click in the Eclipse toolbar.

  2. Click Yes to confirm.

    This removes the line numbers from the COBOL sequence area.

To insert line numbers beyond the end of area B:

  1. In the IDE preferences for line numbering, check Standard (right-hand margin).

  2. Click Apply and Close.

  3. Right-click the ZBNKPRT1.cbl file in the editor, and click Source > Renumber.

  4. Click Yes to confirm.

    You should now see line numbers running down both sides of the source code:

  5. Click Edit > Undo Typing as necessary to revert your changes to the file.

JCL editing

  1. Double-click the ZBNKSTMT.jcl file in the Bankdemo project to open it in the associated editor.

    The editor supports background parsing, syntax checking, content assist and an outline view like the COBOL Editor does.

BMS editing

There are two ways to edit BMS files in Eclipse. The first one is to use a BMS text editor, and the other one is to use a BMS Preview view.

To open the BMS file in the IDE text view:

  1. In the Application Explorer view, right-click MBANK10.bms in the bms\cobol folder of your project, and click Open With > BMS Editor.

You can also explore your BMS maps and mapsets in the BMS Preview view:

  1. Make sure that MBANK10.bms is opened in the BMS text editor.

  2. Click (Toggle the BMS previewer view) in the Eclipse toolbar to start the BMS Preview view.

  3. In addition, you can open the Outline view to see the maps within the MBANK10 mapset.

  4. Experiment by double-clicking on various fields in the BMS file in the text editor.

    Notice how the respective fields are highlighted in the BMS Preview, and in the Outline view.

    For more about the BMS Preview view, check your product Help.

Editing data files

Next, you can edit the data file using the Micro Focus Data Tools Editor:

  1. In the Application Explorer view, right-click the .dat file, and click Open With > Data File Tools.

    This starts the Data File Editor and loads the .dat file in the Open Data File dialog box.

  2. Click Open Exclusive to load the file.

  3. Data File Editor loads the data file and shows two views:

    • The left-hand pane shows the raw form of the file. Because many of the field are COMP-3 fields, the data in these fields is presented in an ASCII view.
    • The right-hand pane shows the record layout for the file in its detailed field view and the COMP-3 fields are shown in a much better, editable form.

  4. Change the value of BAC-REC-BALANCE from 91.14 to 132.76 as follows:

    a. Click the line for BAC-REC-BALANCE in the right pane, and then click , Edit Record. This highlights the record.

    b. Double-click in the Value field for BAC-REC-BALANCE.

    c. Use the arrow keys to move the cursor inside the Value field.

    d. Type 132.76 then click , Save Record.

    e. Confirm you want to save the changes to this record.

    f. Using the same method, restore the previous value of BAC-REC-BALANCE: 91.14

  5. Close the Data File Tools utility.

Compiling the Source Code

Back to Top

By default, the Eclipse IDE is set to build projects automatically. Whenever you add new COBOL or BMS files to the Bankdemo project, the IDE starts an automatic build (compilation).

Important: You need Enterprise Developer or Enterprise Developer for z Systems to create executables. Building projects is not supported in Enterprise Developer Connect.

To turn the automatic build off:

  • Click Project and disable Build Automatically.

To start a build manually:

  • Click Project > Build Project.

    The build in this case checks for any files that have changed and does two things:

  • Compiles any files affected by the changes

  • Relinks the built files if necessary

Turn the automatic build on:

  • Click Project and enable Build Automatically.

COBOL Compiler control

The Micro Focus COBOL Compiler can compile many different COBOL dialect variations. It can also compile COBOL code that contains EXEC CICS or EXEC SQL statements. The Compiler is controlled through a series of "directives" which are passed to the Compiler at build time. You can set directives at either a project or component level.

Often the directives can be set only at the project level, which means that all component files in the project use them. Sometimes, you have a component which you need to compile with different directives. In this case, you can set the directives at the component level which overrides the project settings.

For example, most of the programs in your project could be using Enterprise COBOL for z/OS and only a few could use VS COBOL II. In this case, you would set directives for Enterprise COBOL for z/OS at the project level, and VS COBOL II at the respective COBOL programs.

The Bankdemo application already has the required Compiler directives set on the files. At build time, the IDE invokes the COBOL compiler to compile the sources and create a number of files. These "built" files can vary, but each COBOL program in the Bankdemo application compiles to produce the following three types of file:

File type Function
.so - shared object Effectively the executable module the Compiler creates for each program.
.idy - debugger information The file created by the Compiler which allows debugging of the module.
.o - object file A temporary file the Compiler creates while producing the .so file.

BMS Compiler control

In the same way as for COBOL, the BMS compilation is controlled both at project and at component level.

The BMS Compiler produces the following two types of file:

File type Function
.mod - BMS executable A file created by the BMS compiler which is the executable module relating to the BMS source.
.cpy - copybook A copybook that contains the BMS mapping for use in a COBOL program.

Producing a Compiler listing

You can configure the IDE to create a fully expanded Compiler listing file during the build. The following is also an example of setting a directive at component level:

  1. In the Application Explorer view, right-click ZBNKPRT1.cbl, and click Properties.

  2. Click COBOL in the left-hand pane and check Enable file specific settings.

  3. Set Generate listing file to Yes, and then click Apply and Close.

    During the build, the Compiler produces a source listing file, ZBNKPRT1.lst, in a Listing subfolder in the project directory (/home/username/MFETDUSER/workspace/Bankdemo/Listing in this case). The listing file includes a fully expanded source file together with some Compiler system information at the start and with any Compiler errors highlighted with asterisks. You can view this listing from within the IDE: double-click the .lst file in the Listing folder of your project.

Example of compiling a COBOL program with errors

You can introduce some Compiler errors into one of the programs to see how the Compiler handles them:

  1. In the Application Explorer view, double-click ZBNKPRT1.cbl.

  2. Page down the program a few pages to the start of the Procedure Division around line 224.

  3. Introduce a few syntax errors as follows:

    • On line 226 change RUN-TIME to RUN-TME

    • On line 229 change SPACES to SPOCES

    • On line 237 place a period after the END-IF

    • Move one of the copybooks, CTIMERD.cpy, from the copybook folder to the jcl folder. To do this, right-click the file in Application Explorer, and click Move, then select the folder to move the file to, and click OK.

    This triggers a build of the project which will also update the listing file. The messages in the Console view indicate that there are build errors.

    The errors are underlined with red wavy lines and a colored bar is added to the left of each line that includes an error.

  4. Hover over an underlined item to view a pop-up with an explanation of what the error is.

  5. Save the program.

  6. Click the Problems tab to view the list of errors.

    If it is hidden you can open it by clicking Window > Show View > Problems.

    Tip: Click the column headings to sort the list into an appropriate order; for example, click the Program heading to order the errors by program.

  7. Double-click an error in the list to position the cursor on the line of code that contains the error.

  8. To fix the copybook error:

    a. Locate the error related to the unknown copybook in the Problems view.

    b. Right-click the line with the error message in the Problems view, and click Quick Fix.

    The Quick Fix window appears.

    c. Click Enable copybook path entry for directory containing CTIMERD, then click Finish.

    This displays a message that the directory containing the copybook is not on the copybook path for the project.

    d. Click Yes to add the Bankdemo/jcl folder where you moved the copybook to the copybook path of the project.

    This triggers a rebuild of the project which now compiles cleanly as it now locates the copybook.

  9. Check the errors in the listing file, ZBNKPRT.lst as follows: a. Double-click the .lst file in the Listing folder.

    The lines that include syntax errors are marked with asterisks (**).

  10. In the IDE, fix the errors in ZBNKPRT.cbl, and save the file.

    There should be no errors in the build now.

    Note: Move the copybook back to its original directory in case other projects are expecting to locate it there.

Unit Testing the Batch Application

Back to Top

The first thing you need to do is check that the Bankdemo application is executing correctly.

To execute the JCL, you need to run the application in an instance of the Micro Focus Enterprise Server (sometimes abbreviated to Enterprise Server). This demonstration includes a pre-configured enterprise server instance called BANKDEMO which you need to import in Enterprise Server and start before you execute the Bankdemo application.

Important: You need Enterprise Developer or Enterprise Developer for z Systems to execute the application as running applications is not supported in Enterprise Developer Connect.

Importing the Bankdemo server

This sample provides a script that creates the region definition to use in this tutorial:

  1. Navigate to the /home/username/MFETDUSER/tutorial directory and open a terminal from this location.

  2. Type ./createdefinition.sh, and press Enter.

    Note: You might need to give execute permissions to this script. To do this, execute: chmod +x createdefinition.sh.

    This executes the script and creates the Enterprise Server region definition file, BANKDEMO.xml, in the same folder. The file is configured for the location in which you saved the sample files.

Next, ensure that the following two services are running on your machine:

  • Enterprise Server Common Administration (ESCWA) - execute the following from a terminal that has the COBOL environment set if you need to start this:

    nohup escwa < /dev/null > escwa.out 2>&1 &

  • Micro Focus Directory Server - from a terminal that has the COBOL environment set, execute the following as root if you need to start this:

    mfds64 &

To verify that the services are started:

  1. Open the following URL in a browser: http://localhost:10086/.

    This should load the ESCWA UI.

  2. In ESCWA, click Native in the taskbar at the top of the screen.

  3. Expand Directory Servers > Default in the left pane.

    You should be able to see the default regions the product comes with.

Now you can import the definition of the BANKDEMO logical server (LSER) in Enterprise Server:

  1. In Eclipse, click the Server Explorer view.

    If the window is not visible, click View > Show View > Server Explorer, or View > Show View > Other, then expand Micro Focus, click Server Explorer, and click Open.

  2. Right-click Default [127.0.0.1:86], and click Import Server.

  3. In the Import Server dialog box, click Browse next to the Import file field.

  4. Set the file extension field to .xml.

  5. Browse to the /home/username/MFETDUSER/tutorial folder, select BANKDEMO.xml, click Open, and then click Finish.

    Check the Console view for the results of importing the server. The Server Explorer window should now show a server called BANKDEMO under Default [127.0.0.1:86]. If the server is not visible, right-click Default [127.0.0.1:86], and click Refresh.

Associate the BANKDEMO Enterprise Server with your project

You need to associate your application with the BANKDEMO server. This ensures that the project's loadlib directory is used by the BANKDEMO enterprise server. BANKDEMO is configured to use the $IDE_LOADLIB environment variable as the first location in the search path and, when the IDE starts the server, then $IDE_LOADLIB is set to the output directories of any project associated with the server.

1. Right-click the BANKDEMO server, point to Associate with project, then click Bankdemo.

Configure the IDE settings for Enterprise Server

Configure the IDE to start the associated BANKDEMO server automatically as follows:

  1. Click Window > Preferences.

  2. Expand Micro Focus, and click Enterprise Server.

  3. Set the following options on this page to Always in order to enable the IDE to start or stop the associated server, and to enable dynamic debugging, for when it is not enabled in the server:

    • Automatically start the associated server - this ensures the IDE will start the server if it is not running when you execute the application.

    • Automatically stop servers started by Eclipse when closing Eclipse - this enables the IDE to stop servers when you close Eclipse.

    • Automatically enable dynamic debugging - this ensures the IDE will check whether the server has dynamic debugging enabled and, if it is not, will enable it when you start debugging.

  4. Click Apply and Close.

Starting the BANKDEMO Enterprise Server and Showing the Server Log

These are the steps to start the server manually, and are included for completeness. You do not have to start the server manually, as you have configured the IDE to start the server automatically.

  1. In Server Explorer, right-click BANKDEMO, then click Start.

    Note: You might receive an ESMAC Sign On dialog prompting you to provide connection details for the BANKDEMO server. This is a standard security dialog. Click OK without specifying any sign on details. Also, you may skip enabling password recovery.

    You can check the Console view to ensure that the BANKDEMO server has started successfully.

  2. Right-click the BANKDEMO server in Server Explorer, and click Show Console Log.

    Check the Console view as it now shows the messages from the server log:

  3. Right-click the BANKDEMO server again, and then click Refresh to see that the server has started.

    You are now ready to execute the JCL job.

Executing JCL

The JCL provided in your demo causes the COBOL application to read a file, sort the data and produce a report. The JCL file ZBNKSTMT.jcl is in the Sources > jcl folder of the project. To submit this job:

  1. In the Application Explorer view, expand the jcl folder.

  2. Right-click ZBNKSTMT.jcl, and click Submit JCL to associated Server.

    Note: If you have not started the BANKDEMO server yet, since you configured the IDE to start the server automatically, you receive a notification that the server will be started. Click Yes to confirm this.

    Check the Console view to see that this job has been submitted.

  3. Click one of the links to show the spool details for the job.

Viewing the Catalog and the Spool

You can open the catalog and the spool directly from Server Explorer.

To view the catalog:

  1. In Server Explorer, right-click the BANKDEMO server, and click Show Catalog.

    This opens the catalog:

  2. Expand the Display section for the catalog item to preview the contents of the file.

To view the spool:

  1. In Server Explorer, right-click the BANKDEMO server, and click Show Spool.

  2. Double-click on the name of one of the jobs in the list to open the details in a new tab.

  3. Details of the job are displayed in their own appropriate sections; expand these sections to view the details.

    In the DD Entries section, there are:

    • Two SYSOUT results (one for the EXTRACT and one for the SORT). Double-click these and see the SYSOUT Details section.
    • The PRINTOUT is the final printed results created by your job. Double-click PRINTOUT in the DD Entries section to see the results:

You can now start to look at how to run the online application.

Unit Testing the Online Application

Back to Top

In the previous step, Unit Testing the Batch Application, you used the BANKDEMO enterprise server. You are going to use it again for online testing.

As with JCL, execution of the jobs requires a previously configured Micro Focus enterprise server.

Important: You need Enterprise Developer or Enterprise Developer for z Systems to execute the application as running applications is not supported in Enterprise Developer Connect.

Executing the CICS application

The CICS application requires that you use a 3270 terminal emulator. This tutorial uses Micro Focus Host Access for the Cloud (HACloud), but you may adapt the tutorial to suit your terminal emulator of choice.

Start the HACloud session server

You need to start the HACloud session server before you can use the HACloud TN3270 emulator. To do this you need to start startsessionserver.sh script as follows:

  1. Ensure that the installed Java is added to the PATH environment variable.

  2. Open a terminal and set up the COBOL environment in it.

  3. Run the following to start the session server:

       startsessionserver.sh

  4. Check the terminal for the messages that the Micro Focus HACloud Session Server has started.

Configuring the TN3270 settings in the IDE

To check the IDE preferences for the TN3270 emulator:

  1. In the IDE, click Window > Preferences.
  2. Expand Micro Focus > Enterprise Server, and click TN3270.
  3. Ensure that Enable display, Host Access for the Cloud and Connect automatically are all selected.
  4. Click Apply and Close.

Starting the terminal emulator

  1. Right-click the BANKDEMO server in Server Explorer, and click Show TN3270 Display.

    This opens Host Access for the Cloud in your default browser and automatically establishes a 3270 terminal connection to the BANKDEMO server. You can see the starting page of the ES/MTO region BANKDEMO.

Executing the Enterprise Server Demonstration

  1. Type your logon details, and press Enter.

    A suitable User Id is b0001. You can type anything as a Password - the field must not be empty though.

  2. Type / against Display your account balances and press Enter to see the details for this customer.

  3. You can explore this application further if you wish or press Ctrl + F2 to clear the screen and conclude the session.

If HACloud disconnects from the server, you can connect again manually as follows:

  1. Click Open Session, , in the toolbar of the HACloud window.

  2. In the Available cs aplps dialog box, click on the BANKDEMO server.

    This connects the display to the BANKDEMO server and loads the start screen of the application.

  3. Follow the steps described earlier in this topic to execute the application in the HACloud view.

Stopping the enterprise server

You can stop the Bankdemo server from within Server Explorer. You can leave it running though, if you wish to continue this tutorial.

Note: In production, enterprise servers are long-running processes that are usually run for many months without stopping and starting.

Debugging the Batch Application

Back to Top

You are going to debug the batch Bankdemo application.

Important: You need Enterprise Developer or Enterprise Developer for z Systems to debug applications as this feature is not supported in Enterprise Developer Connect.

Starting the server

If the enterprise server is not yet started, you need to start it as follows:

  1. Open the Server Explorer view.

    If the view is not visible, click Window > Show View > Other. Select Micro Focus > Server Explorer and then click OK.

  2. In Server Explorer, right-click the Bankdemo server and then click Start.

    Wait until the server has started. In the list of servers in Server Explorer, BANKDEMO still has a red square next to it. This is a refresh delay.

Viewing the debug configurations

The project has two pre-configured debug configurations; a CICS Debug and a JCL Debug one, that you will use to debug the batch and the online application.

  1. In the Application Explorer view, select the BANKDEMO project, and then click Run > Debug Configurations.
  2. In the left-hand pane of the Debug Configurations dialog box, expand COBOL Enterprise Server.
  3. Click CICS Debug.
  4. Click the different tabs in the right-hand pane to see what debug settings are enabled for this configuration. Note that this configuration will be used with the BANKDEMO server.
  5. Click JCL Debug under COBOL Enterprise Server.
  6. Click the different tabs in the right-hand pane to see what debug settings are enabled for this configuration.
  7. Click Close to close the Debug Configurations dialog box without saving any changes.

Starting the debugger

You can now start the debugger. It starts in the background until a program which is debuggable is triggered. To start the debugger:

  1. In the Application Explorer view, select the BANKDEMO project, and then select Run > Debug Configurations from the menu bar.

  2. In the left-hand pane of the Debug Configurations dialog expand COBOL Enterprise Server.

  3. Click JCL Debug, and then click Debug.

  4. You might receive a message about opening the Debug perspective when it launches. If you do, click Yes.

    This opens a new Debug view, showing that the Micro Focus Debugger is waiting for attachment.

    In addition, in the top right of the main screen, the view has changed from Team Developer to Debug:

    Click the respective icon to switch between the two perspectives.

  5. Click the Team Developer icon for now.

  6. In Server Explorer, right-click the BANKDEMO enterprise server, and click Refresh.

    The application is now waiting for an event that will trigger debugging.

Simple debugging

You are going to look at some simple features inside the debugger. Start by submitting the JCL job:

  1. In the Application Explorer view, expand the jcl folder in your project.

  2. Right-click ZBNKSTMT.jcl, and click Submit JCL to associated Server.

  3. Depending on what you have done before, you may receive a message to Confirm Perspective Switch. If you receive it, check Remember my decision, and click Yes. If Eclipse does not switch to

    the Debug perspective automatically, click the Debug button, , in the right upper corner of the main Eclipse window to switch the perspective.

    This starts the debugger and opens ZBNKEXT1.cbl for debugging, with the execution point set on the first line of Procedure Division.

If you need to display the line numbers in the editor:

  1. Right-click in the left-most gray area of the editor, and click Show Line Numbers.

Stepping through the code

The highlighted line of code is the one the IDE will execute next.

  1. Press F5 to execute the line.

    The PERFORM statement executes and takes you to the line starting with IF TIMER. You can also see that a Variables view is now open in the IDE showing the current value of a data item on the line of code which is about to be executed.

  2. Press F5 slowly a few more times until you reach line 638. Watch the code as you step through it and notice how the values of the variables change inside the Variables view.

Looking at data values

  1. Scroll to line 283 of ZBNKEXT1.cbl.

  2. Hover the WS-RECORD-COUNTER2 data item.

    This provides you with details of the location, the size, the format, the number of times the field is used in the program, and the current value of the data item.

  3. To change the value of WS-RECORD-COUNTER2, click the data item in the editor, then right-click it, and click Inspect item.

    This opens a pop-up window showing the value of the data item.

  4. Click Add to Expressions View in the pop-up.

    This opens the Expressions tabbed view and adds the data item to it.

  5. On the row for WS-RECORD-COUNTER2, click the arrow next to the data item to expand it.

  6. In the repeated version of the field name, change the value from 00000 to 00006.

    The new value is used from this point.

Running CSI queries

You can use the COBOL Source Information (CSI) functionality and its Quick Browse dialog to obtain information about your program when you are debugging it. This example shows details for data items starting WS-, such as the name, definition, and amount of times each item occurs in the program.

  1. Click the Quick Browse button () on the toolbar to start the Quick Browse dialog box.

  2. Enter a simple query such as WS-*.

  3. Click OK to run the query.

    The results are shown in the Search view.

    To see more examples of CSI queries, start the Quick Browse dialog box again, and press F1 to open the product help.

Setting a simple breakpoint

Check the Breakpoints view at the top right of the screen. Currently, there are no breakpoints set in the program. To set a simple breakpoint:

  1. Scroll down the code to line 171 of ZBNKEXT1.cbl.

  2. Double-click in the grey area to the left of this line or right-click in the same place, and click Toggle Breakpoint.

  3. Do the same for line 177.

  4. Use F5 to step through the code and F8 to execute it. Press F8 now.

    The execution of the code stops at the first breakpoint.

  5. Press F8 to resume the execution.

    You can see that ZBNKEXT1.cbl finishes and the debugger starts to debug the second program defined in the JCL. This program executes to completion and the job completes.

Stop debugging

Although the job has completed, the debugger is still waiting for the next event. To stop debugging:

  1. Click Run > Terminate or click the terminate button, , in the debugger toolbar.

  2. Finally, switch back to the Team Developer Perspective.

Debugging the Online Application

Back to Top

Important: You need Enterprise Developer or Enterprise Developer for z Systems to debug applications as this feature is not supported in Enterprise Developer Connect.

Starting the server

If the enterprise server is not yet started, you should start it as follows:

  1. Click the Server Explorer tab in the bottom right pane of the IDE.

  2. In Server Explorer, right-click the BANKDEMO server, and then click Start.

    Wait until the server has started. If in the list of servers in Server Explorer BANKDEMO still has a red square next to it, right-click it, and click Refresh.

Starting the debugger

You can now start the debugger. It starts in the background until a program which is debuggable is triggered. The demonstration application includes around 60 programs and just eight of them, the ones which are included in the project, are debuggable. To start the debugger:

  1. In the Application Explorer view, select the BANKDEMO project and then select Run > Debug Configurations from the menu bar.

  2. In the left-hand pane of the Debug Configurations dialog box, expand COBOL Enterprise Server.

  3. Click CICS Debug, and then click Debug.

  4. You might receive a message about opening the Debug perspective. Click Yes.

    This opens a new Debug pane, showing that the debugger is waiting for an attachment:

    In addition, in the top right corner of the main screen, the perspective has changed from Team Developer to Debug:

    .

    The TN3270 Connection Properties dialog box opens up.

  5. Click Connect to accept the connection details.

    This opens the Host Access for the Cloud view, connects the display to the BANKDEMO enterprise server, and loads the start screen of the application.

    Your Eclipse application is now waiting for an event to happen that will trigger the debugging.

  6. In the toolbar, click the downward arrow next to the debug icon.

    You can see that the pre-configured CICS and JCL debug configurations have now appeared in the menu.

  7. In the HACloud view, press Ctrl + F2 to clear the screen of the emulator.

  8. Enter transaction id BANK, and press Enter.

    The program SBANK00P starts to execute on line 105.

Simple debugging

You use the same features as previously to debug the application.

  1. Click Run > Step Into or press F5 a few times to go through executing the code.

  2. Watch how the values of the variables shown in the Variable view change.

Stopping debugging

  1. Click Run > Terminate or click the terminate button, , in the debugger toolbar to stop debugging.

  2. Finally, click the Team Developer perspective button , to switch back to editing your application.

This concludes this set of tutorials that introduce Enterprise Developer.

Note: You should re-enable Enterprise Server security if you have not already done so. See To recreate the Default Enterprise Server Security Configuration in the product documentation for steps on how to re-enable security.

Back to Top