RTC on mcHF V.7

[AJ3G]

I am wondering if someone could lend a hand? I have completed the installation of RTC Components per UHSDR’s Recommended Modifications. I see voltage at Pin 6 of the MCU (U204A) from the battery. I have have removed C282, cut the trace leading to Pin 6 of the MCU, and installed a battery.

I have rebooted twice, and I still get the “N/A” under RAM Backup Battery in the System Info Menu. The instruction ask that you clear the “N/A” under RAM Backup Battery, before proceeding with anything further. At the moment, I cannot clear the “N/A”. I am measuring 3V3 at Pin 6, so the wiring is good from the battery to the Micro.

I did look at the Expert/Debug Menu, and note that there is no longer a “RTC Start”, so I am wondering if there has been some other change that I am not aware of in the code that has transpired since the “Recommended Modifications” document was posted?