[input.vsphere] Option query for maxQueryMetrics failed. Using default

[lee-costa]

Relevant telegraf.conf:

# Read metrics from one or many vCenters
[[inputs.vsphere]]
    ## List of vCenter URLs to be monitored. These three lines must be uncommented
  ## and edited for the plugin to work.
  vcenters = [ "https://REDACTED/sdk" ]
  username = "REDACTED
  password = "REDACTED"

  ## VMs
  ## Typical VM metrics (if omitted or empty, all metrics are collected)
  vm_metric_include = [
    "cpu.demand.average",
    "cpu.idle.summation",
    "cpu.latency.average",
    "cpu.readiness.average",
    "cpu.ready.summation",
    "cpu.run.summation",
    "cpu.usagemhz.average",
    "cpu.usage.average",
    "cpu.used.summation",
    "cpu.wait.summation",
    "mem.active.average",
    "mem.granted.average",
    "mem.latency.average",
    "mem.swapin.average",
    "mem.swapinRate.average",
    "mem.swapout.average",
    "mem.swapoutRate.average",
    "mem.usage.average",
    "mem.vmmemctl.average",
    "mem.consumed.average",
    "net.bytesRx.average",
    "net.bytesTx.average",
    "net.droppedRx.summation",
    "net.droppedTx.summation",
    "net.usage.average",
    "power.power.average",    
    "virtualDisk.numberReadAveraged.average",
    "virtualDisk.numberWriteAveraged.average",
    "virtualDisk.read.average",
    "virtualDisk.readOIO.latest",
    "virtualDisk.throughput.usage.average",
    "virtualDisk.totalReadLatency.average",
    "virtualDisk.totalWriteLatency.average",
    "virtualDisk.write.average",
    "virtualDisk.writeOIO.latest",
    "sys.uptime.latest",
    "disk.usage.average",
  ]
  # vm_metric_exclude = [] ## Nothing is excluded by default
  # vm_instances = true ## true by default

  ## Hosts 
  ## Typical host metrics (if omitted or empty, all metrics are collected)
  host_metric_include = [
    "cpu.coreUtilization.average",
    "cpu.costop.summation",
    "cpu.demand.average",
    "cpu.idle.summation",
    "cpu.latency.average",
    "cpu.readiness.average",
    "cpu.ready.summation",
    "cpu.swapwait.summation",
    "cpu.usage.average",
    "cpu.usagemhz.average",
    "cpu.used.summation",
    "cpu.utilization.average",
    "cpu.wait.summation",
    "disk.deviceReadLatency.average",
    "disk.deviceWriteLatency.average",
    "disk.kernelReadLatency.average",
    "disk.kernelWriteLatency.average",
    "disk.numberReadAveraged.average",
    "disk.numberWriteAveraged.average",
    "disk.read.average",
    "disk.totalReadLatency.average",
    "disk.totalWriteLatency.average",
    "disk.write.average",
    "mem.active.average",
    "mem.latency.average",
    "mem.state.latest",
    "mem.swapin.average",
    "mem.swapinRate.average",
    "mem.swapout.average",
    "mem.swapoutRate.average",
    "mem.totalCapacity.average",
    "mem.usage.average",
    "mem.vmmemctl.average",
    "net.bytesRx.average",
    "net.bytesTx.average",
    "net.droppedRx.summation",
    "net.droppedTx.summation",
    "net.errorsRx.summation",
    "net.errorsTx.summation",
    "net.usage.average",
    "power.power.average",
    "storageAdapter.numberReadAveraged.average",
    "storageAdapter.numberWriteAveraged.average",
    "storageAdapter.read.average",
    "storageAdapter.write.average",
    "sys.uptime.latest",
  ]
  # host_metric_exclude = [] ## Nothing excluded by default
  # host_instances = true ## true by default

  ## Clusters 
  # cluster_metric_include = [] ## if omitted or empty, all metrics are collected
  # cluster_metric_exclude = [] ## Nothing excluded by default
  # cluster_instances = true ## true by default

  ## Datastores 
  # datastore_metric_include = [] ## if omitted or empty, all metrics are collected
  # datastore_metric_exclude = [] ## Nothing excluded by default
  # datastore_instances = false ## false by default for Datastores only

  ## Datacenters
  datacenter_metric_include = [] ## if omitted or empty, all metrics are collected
  datacenter_metric_exclude = [ "*" ] ## Datacenters are not collected by default.
  # datacenter_instances = false ## false by default for Datastores only

  ## Plugin Settings  
  ## separator character to use for measurement and field names (default: "_")
  # separator = "_"

  ## number of objects to retreive per query for realtime resources (vms and hosts)
  ## set to 64 for vCenter 5.5 and 6.0 (default: 256)
  # max_query_objects = 256

  ## number of metrics to retreive per query for non-realtime resources (clusters and datastores)
  ## set to 64 for vCenter 5.5 and 6.0 (default: 256)
  # max_query_metrics = 256

  ## number of go routines to use for collection and discovery of objects and metrics
  # collect_concurrency = 1
  # discover_concurrency = 1

  ## whether or not to force discovery of new objects on initial gather call before collecting metrics
  ## when true for large environments this may cause errors for time elapsed while collecting metrics
  ## when false (default) the first collection cycle may result in no or limited metrics while objects are discovered
  # force_discover_on_init = false

  ## the interval before (re)discovering objects subject to metrics collection (default: 300s)
  # object_discovery_interval = "300s"

  ## timeout applies to any of the api request made to vcenter
  # timeout = "20s"

  ## Optional SSL Config
  # ssl_ca = "/path/to/cafile"
  # ssl_cert = "/path/to/certfile"
  # ssl_key = "/path/to/keyfile"
  ## Use SSL but skip chain & host verification
   insecure_skip_verify = true

System info:

[Include Telegraf version, operating system name, and other relevant details]

Latest Telegraf version
Ubuntu 16.04
vSphere Client version 6.7.0

Steps to reproduce:

1. ...Start telegraf
2. ...

Expected behavior:

No warnings

Actual behavior:

[input.vsphere] Option query for maxQueryMetrics failed. Using default

Additional info:

[Include gist of relevant config, logs, etc.]

I think I this issue describes mine but there's no solution.

[prydin]

This is benign. It just means that the plugin didn't find a en explicit setting for maxQueryMetrics and that it's using the default instead. This should have been a debug log instead of an informational-level log. We will address this in the next PR.

[sdesbois]

I have the same issue.
Problem is that I have put in place a custom value for that.

  ## number of metrics to retreive per query for non-realtime resources (clusters and datastores)
  ## set to 64 for vCenter 5.5 and 6.0 (default: 256)
  max_query_metrics = 32

2018-11-26T16:35:59Z I! [input.vsphere] Option query for maxQueryMetrics failed. Using default

[jorioux]

This is benign. It just means that the plugin didn't find a en explicit setting for maxQueryMetrics and that it's using the default instead. This should have been a debug log instead of an informational-level log. We will address this in the next PR.

That's not true. Even with the explicit setting in the input config, it throws this error.

[prydin]

You will see the message even if you've configured it in the config file. That's the correct behavior. It will query for the setting in vCenter to make sure you haven't specified a value that's higher than what the vCenter can handle.

What's NOT correct is that it should have been a DEBUG message instead of an INFO. This will be fixed in 1.9.1.

[sspaink]

Closing as it looks like this was resolved in #5113