diff --git a/compiler/rustc_parse/src/parser/diagnostics.rs b/compiler/rustc_parse/src/parser/diagnostics.rs index c1aac84bcaec7..db23ce6fb7b39 100644 --- a/compiler/rustc_parse/src/parser/diagnostics.rs +++ b/compiler/rustc_parse/src/parser/diagnostics.rs @@ -2958,9 +2958,10 @@ impl<'a> Parser<'a> { /// This checks if this is a conflict marker, depending of the parameter passed. /// - /// * `>>>>>` - /// * `=====` - /// * `<<<<<` + /// * `<<<<<<<` + /// * `|||||||` + /// * `=======` + /// * `>>>>>>>` /// pub(super) fn is_vcs_conflict_marker( &mut self, @@ -2990,14 +2991,18 @@ impl<'a> Parser<'a> { } pub(crate) fn err_vcs_conflict_marker(&mut self) -> PResult<'a, ()> { + // <<<<<<< let Some(start) = self.conflict_marker(&TokenKind::BinOp(token::Shl), &TokenKind::Lt) else { return Ok(()); }; let mut spans = Vec::with_capacity(3); spans.push(start); + // ||||||| let mut middlediff3 = None; + // ======= let mut middle = None; + // >>>>>>> let mut end = None; loop { if self.token.kind == TokenKind::Eof { @@ -3018,29 +3023,50 @@ impl<'a> Parser<'a> { } self.bump(); } + let mut err = self.dcx().struct_span_err(spans, "encountered diff marker"); - err.span_label(start, "after this is the code before the merge"); - if let Some(middle) = middlediff3 { - err.span_label(middle, ""); - } + match middlediff3 { + // We're using diff3 + Some(middlediff3) => { + err.span_label( + start, + "between this marker and `|||||||` is the code that we're merging into", + ); + err.span_label(middlediff3, "between this marker and `=======` is the base code (what the two refs diverged from)"); + } + None => { + err.span_label( + start, + "between this marker and `=======` is the code that we're merging into", + ); + } + }; + if let Some(middle) = middle { - err.span_label(middle, ""); + err.span_label(middle, "between this marker and `>>>>>>>` is the incoming code"); } if let Some(end) = end { - err.span_label(end, "above this are the incoming code changes"); + err.span_label(end, "this marker concludes the conflict region"); } - err.help( - "if you're having merge conflicts after pulling new code, the top section is the code \ - you already had and the bottom section is the remote code", + err.note( + "conflict markers indicate that a merge was started but could not be completed due \ + to merge conflicts\n\ + to resolve a conflict, keep only the code you want and then delete the lines \ + containing conflict markers", ); err.help( - "if you're in the middle of a rebase, the top section is the code being rebased onto \ - and the bottom section is the code coming from the current commit being rebased", + "if you're having merge conflicts after pulling new code:\n\ + the top section is the code you already had and the bottom section is the remote code\n\ + if you're in the middle of a rebase:\n\ + the top section is the code being rebased onto and the bottom section is the code \ + coming from the current commit being rebased", ); + err.note( - "for an explanation on these markers from the `git` documentation, visit \ - ", + "for an explanation on these markers from the `git` documentation:\n\ + visit ", ); + Err(err) } diff --git a/tests/ui/parser/diff-markers/enum-2.stderr b/tests/ui/parser/diff-markers/enum-2.stderr index 20e551c2f959a..b76cf5d5a01ee 100644 --- a/tests/ui/parser/diff-markers/enum-2.stderr +++ b/tests/ui/parser/diff-markers/enum-2.stderr @@ -2,20 +2,25 @@ error: encountered diff marker --> $DIR/enum-2.rs:3:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `|||||||` is the code that we're merging into LL | x: u8, LL | ||||||| - | ------- + | ------- between this marker and `=======` is the base code (what the two refs diverged from) LL | z: (), LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | y: i8, LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/enum.stderr b/tests/ui/parser/diff-markers/enum.stderr index be94331dce528..0ce473bc70232 100644 --- a/tests/ui/parser/diff-markers/enum.stderr +++ b/tests/ui/parser/diff-markers/enum.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/enum.rs:2:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | Foo(u8), LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | Bar(i8), LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/fn-arg.stderr b/tests/ui/parser/diff-markers/fn-arg.stderr index aabcb826c1283..24521ffa62623 100644 --- a/tests/ui/parser/diff-markers/fn-arg.stderr +++ b/tests/ui/parser/diff-markers/fn-arg.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/fn-arg.rs:3:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | x: u8, LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | x: i8, LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/item-with-attr.stderr b/tests/ui/parser/diff-markers/item-with-attr.stderr index eefb2792e90bc..432673cd5518b 100644 --- a/tests/ui/parser/diff-markers/item-with-attr.stderr +++ b/tests/ui/parser/diff-markers/item-with-attr.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/item-with-attr.rs:2:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | fn foo() {} LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | fn bar() {} LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/item.stderr b/tests/ui/parser/diff-markers/item.stderr index a3092ebfcfd36..180c74e5d6967 100644 --- a/tests/ui/parser/diff-markers/item.stderr +++ b/tests/ui/parser/diff-markers/item.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/item.rs:1:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | fn foo() {} LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | fn bar() {} LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/statement.stderr b/tests/ui/parser/diff-markers/statement.stderr index c6c6cae876594..6dccce4a48eee 100644 --- a/tests/ui/parser/diff-markers/statement.stderr +++ b/tests/ui/parser/diff-markers/statement.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/statement.rs:10:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | S::foo(); LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | S::bar(); LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/struct-expr.stderr b/tests/ui/parser/diff-markers/struct-expr.stderr index bdea8c841c638..3733cdd349644 100644 --- a/tests/ui/parser/diff-markers/struct-expr.stderr +++ b/tests/ui/parser/diff-markers/struct-expr.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/struct-expr.rs:6:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | x: 42, LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | x: 0, LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/struct.stderr b/tests/ui/parser/diff-markers/struct.stderr index 749941290cb82..44f8346613e68 100644 --- a/tests/ui/parser/diff-markers/struct.stderr +++ b/tests/ui/parser/diff-markers/struct.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/struct.rs:2:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | x: u8, LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | x: i8, LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/trait-item.stderr b/tests/ui/parser/diff-markers/trait-item.stderr index f01bbe8ba0340..4361542c7743b 100644 --- a/tests/ui/parser/diff-markers/trait-item.stderr +++ b/tests/ui/parser/diff-markers/trait-item.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/trait-item.rs:2:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | fn foo() {} LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | fn bar() {} LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/tuple-struct.stderr b/tests/ui/parser/diff-markers/tuple-struct.stderr index 8dae123c96dca..7fda24ba48532 100644 --- a/tests/ui/parser/diff-markers/tuple-struct.stderr +++ b/tests/ui/parser/diff-markers/tuple-struct.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/tuple-struct.rs:2:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | u8, LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | i8, LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/unclosed-delims-in-macro.stderr b/tests/ui/parser/diff-markers/unclosed-delims-in-macro.stderr index 6995b8e6f2370..927821ddfaedb 100644 --- a/tests/ui/parser/diff-markers/unclosed-delims-in-macro.stderr +++ b/tests/ui/parser/diff-markers/unclosed-delims-in-macro.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/unclosed-delims-in-macro.rs:2:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into ... LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | () { // LL | >>>>>>> 7a4f13c blah blah blah - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/unclosed-delims.rs b/tests/ui/parser/diff-markers/unclosed-delims.rs index 653a605c28c60..7d400c3827bb6 100644 --- a/tests/ui/parser/diff-markers/unclosed-delims.rs +++ b/tests/ui/parser/diff-markers/unclosed-delims.rs @@ -2,13 +2,17 @@ mod tests { #[test] <<<<<<< HEAD //~^ ERROR encountered diff marker -//~| NOTE after this is the code before the merge +//~| NOTE between this marker and `=======` + +//~| NOTE conflict markers indicate that +//~| HELP if you're having merge conflicts //~| NOTE for an explanation on these markers + fn test1() { ======= -//~^ NOTE +//~^ NOTE between this marker and `>>>>>>>` fn test2() { >>>>>>> 7a4f13c blah blah blah -//~^ NOTE above this are the incoming code changes +//~^ NOTE this marker concludes the conflict region } } diff --git a/tests/ui/parser/diff-markers/unclosed-delims.stderr b/tests/ui/parser/diff-markers/unclosed-delims.stderr index d4636150e66b7..1eab96442b4f2 100644 --- a/tests/ui/parser/diff-markers/unclosed-delims.stderr +++ b/tests/ui/parser/diff-markers/unclosed-delims.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/unclosed-delims.rs:3:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into ... LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code ... LL | >>>>>>> 7a4f13c blah blah blah - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error diff --git a/tests/ui/parser/diff-markers/use-statement.stderr b/tests/ui/parser/diff-markers/use-statement.stderr index 6d376166a7f7a..3eac7bebb5af1 100644 --- a/tests/ui/parser/diff-markers/use-statement.stderr +++ b/tests/ui/parser/diff-markers/use-statement.stderr @@ -2,17 +2,22 @@ error: encountered diff marker --> $DIR/use-statement.rs:2:1 | LL | <<<<<<< HEAD - | ^^^^^^^ after this is the code before the merge + | ^^^^^^^ between this marker and `=======` is the code that we're merging into LL | bar, LL | ======= - | ------- + | ------- between this marker and `>>>>>>>` is the incoming code LL | baz, LL | >>>>>>> branch - | ^^^^^^^ above this are the incoming code changes + | ^^^^^^^ this marker concludes the conflict region | - = help: if you're having merge conflicts after pulling new code, the top section is the code you already had and the bottom section is the remote code - = help: if you're in the middle of a rebase, the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased - = note: for an explanation on these markers from the `git` documentation, visit + = note: conflict markers indicate that a merge was started but could not be completed due to merge conflicts + to resolve a conflict, keep only the code you want and then delete the lines containing conflict markers + = help: if you're having merge conflicts after pulling new code: + the top section is the code you already had and the bottom section is the remote code + if you're in the middle of a rebase: + the top section is the code being rebased onto and the bottom section is the code coming from the current commit being rebased + = note: for an explanation on these markers from the `git` documentation: + visit error: aborting due to 1 previous error