.tpbrc

#### TPB CONFIGURATION FILE

### DEVICE SETTINGS

## NVRAM
# Should define the nvram device from where the information about the key
# states is read. Default is to try /dev/nvram, followed by /dev/misc/nvram.
#
#NVRAM       /dev/nvram

## POLLTIME
# Defines the delay between polls in microseconds. Default is 200000.
#
#POLLTIME    200000


### KEYBINDINGS AND CALLBACK

## THINKPAD
# String with command and options that should be executed when ThinkPad
# button is pressed. It is possible to execute any program.
# By default no command is executed.
#
THINKPAD    /home/seb/bin/xlock.sh

## HOME
# String with command and options that should be executed when Home button is
# pressed (only available on A and S series). By default no command is executed.
#
#HOME        /usr/bin/mozilla 

## SEARCH
# String with command and options that should be executed when Search button is
# pressed (only available on A and S series). By default no command is executed.
#
#SEARCH      /usr/bin/mozilla http://www.google.com

## MAIL
# String with command and options that should be executed when Mail button is
# pressed(only available on A and S series). By default no command is executed.
#
#MAIL        /usr/bin/X11/xterm -T mutt -geometry 140x40 -e mutt

## WIRELESS
# String with command and options that should be executed when Wireless button is
# pressed(only available on A and S series). By default no command is executed.
#
#WIRELESS    /usr/bin/X11/xterm -T wavemon -geometry 140x40 -e wavemon

## FAVORITES
# String with command and options that should be executed when Favorites button is
# pressed (only available on A series). By default no command is executed.
#
#FAVORITES

## RELOAD
# String with command and options that should be executed when Reload button is
# pressed (only available on A series). By default no command is executed.
#
#RELOAD

## ABORT
# String with command and options that should be executed when Abort button is
# pressed (only available on A series). By default no command is executed.
#
#ABORT

## BACKWARD
# String with command and options that should be executed when Backward button is
# pressed (only available on A series). By default no command is executed.
#
#BACKWARD

## FORWARD
# String with command and options that should be executed when Forward button is
# pressed (only available on A series). By default no command is executed.
#
#FORWARD

## FN
# String with command and options that should be executed when Fn button is
# pressed. This is only triggered, when Fn is released again and it was not used for
# a key combination.By default no command is executed.
#
#FN

## CALLBACK
# String with command and options that should be executed each button press and
# state change. tpb passes an identifier as first argument and the new state as
# second argument to the callback. So you can do fancy things :) By default no
# command is executed. Supported identifiers and states are:
#
#  IDENTIFIER        STATES/VALUE            
#  thinkpad          pressed                
#  home              pressed                
#  search            pressed                
#  mail              pressed                
#  favorites         pressed
#  reload            pressed
#  abort             pressed
#  backward          pressed
#  forward           pressed
#  fn                pressed
#  zoom              on, off                
#  thinklight        on, off                
#  display           lcd, crt, both         
#  expand            on, off                
#  brightness        PERCENT                
#  volume            PERCENT                
#  mute              on, off                
#  ac_power          connected, disconnected
#  powermgt_ac       high, auto, manual     
#  powermgt_battery  high, auto, manual     
#
#CALLBACK    /usr/share/doc/tpb/callback_example.sh


### MIXER SETTINGS

## MIXER
# Use OSS mixer to change volume and for mute/unmute. This should be use on
# models with no hardware mixer (volume and mute buttons show no effect). R31
# is reported to have no hardware mixer. To use this you must enable write
# access to the NVRAM device (possibly dangerous). Possible values are on and
# off. Default is off.
#
#MIXER      ON

## MIXERSTEPS
# Defines how much steps should be available when using the OSS mixer. Default
# is 14. If an other number of steps is used, tpb needs write access to the
# nvram device.
#
#MIXERSTEPS  14

## MIXERDEVICE
# Defines the mixer device to use for OSS mixer support. Default is /dev/mixer.
#
#MIXERDEVICE /dev/mixer


### POWERMANAGEMENT SETTINGS

## APM
# Some ThinkPads generate mouse and keyboard events or have a high CPU load when
# polling /proc/apm. You may enable this, if you want the AC connected/AC
# disconnected messages. Default is off.
#
#APM         OFF

## POWERMGT
# The program apmiser (part of tpctl package) switches the power management
# mode according to the needs of the user. This results in lots of changes
# displayed in OSD. To avoid this, the power management messages can be turned
# off. Default is auto.
#
#POWERMGT    AUTO


### X11 SETTINGS

## XEVENTS
# Some of the special keys generate X11 events instead of changing the nvram. TPB
# is able to grab those keys and run an application. However some people like to
# use the X11 events through xmodmap or the like. This option turns off the
# grabbing of the events. Affected keys are HOME, SEARCH, MAIL, FAVORITES,
# RELOAD, ABORT, BACKWARD, FORWARD and FN. Default is on.
#
XEVENTS     ON


### ON-SCREEN DISPLAY SETTINGS

## OSD
# Global switch for showing on-screen display for volume, mute and brightness.
# Possible values are on and off. Default is on.
#
OSD         ON

## OSDZOOM
# Specific switch for showing on-screen display for zoom button.
# Possible values are on and off. Default is unset, follows the OSD option.
#
#OSDZOOM     OFF

## OSDTHINKLIGHT
# Specific switch for showing on-screen display for thinklight button.
# Possible values are on and off. Default is unset, follows the OSD option.
#
OSDTHINKLIGHT ON

## OSDDISPLAY
# Specific switch for showing on-screen display for display output button.
# Possible values are on and off. Default is unset, follows the OSD option.
#
OSDDISPLAY ON

## OSDHVEXPANSIOFF
# Specific switch for showing on-screen display for HV expansion button.
# Possible values are on and off. Default is unset, follows the OSD option.
#
#OSDHVEXPANSION OFF

## OSDBRIGHTNESS
# Specific switch for showing on-screen display for brightness buttons.
# Possible values are on and off. Default is unset, follows the OSD option.
#
OSDBRIGHTNESS ON

## OSDVOLUME
# Specific switch for showing on-screen display for ivolume and mute buttons.
# Possible values are on and off. Default is unset, follows the OSD option.
#
OSDVOLUME ON

## OSDPOWERMGT
# Specific switch for showing on-screen display for ipower management changes.
# Possible values are on and off. Default is unset, follows the OSD option.
#
#OSDPOWERMGT OFF

## OSDFONT
# Defines the font for the on-screen display. You may use "xfontsel" to choose
# one. Default is the default font of the xosd library.
#
#OSDFONT     -*-lucidatypewriter-*-*-*-*-*-240-*-*-*-*-*-*

## OSDCOLOR
# Defines the color of the on-screen display. You may use "xcolors" to choose
# one. Default is BLUE.
#
OSDCOLOR    BLUE

## OSDTIMEOUT
# Defines how long (in seconds) the on-screen display is shown after the last
# keys was pressed. Default is 3.
#
#OSDTIMEOUT  3

## OSDOFFSET
# For backward compatibility. Same as OSDVERTICAL.
#
#OSDOFFSET   25

## OSDSHADOW
# Defines the offset of the font shadow in pixels. Default is 2.
#
#OSDSHADOW   2

## OSDSHADOWCOLOR
# Defines the color of the shadow of the on-screen display. You may use
# "xcolors" to choose one. Default is BLACK.
#
#OSDSHADOWCOLOR BLACK

## OSDOUTLINE
# Defines the width of the font outline in pixels. Default is 1.
#
#OSDOUTLINE   1

## OSDOUTLINECOLOR
# Defines the color of the outline of the on-screen display. You may use
# "xcolors" to choose one. Default is BLACK.
#
#OSDOUTLINECOLOR BLACK

## OSDVERTICAL
# Defines the offset from the top or bottom of the screen in pixels. Default is 25.
#
#OSDVERTICAL 25

## OSDHORIZONTAL
# Defines the offset from the left or right of the screen in pixels. Only
# supported by xosd 2.0.0 and above. Default is 25.
#
#OSDHORIZONTAL 25

## OSDPOS
# Defines where the osd is shown. Possible values are top, middle and bottom.
# The value middle is only supported by xosd 2.0.0 and above. Default is bottom.
#
#OSDPOS      BOTTOM

## OSDALIGN
# Defines the alignment of the osd. Possible values are left, center and right.
# Default is left.
#
#OSDALIGN    LEFT