You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Have two displays plugged in; an HDMI display and a DVI-D display.
Turn the DVI-D display OFF, and the HDMI display ON.
Start sway.
Run swaymsg -t get_outputs.
See that both displays are listed as powered on.
For this reproduction, and for the debug log seen above, the DVI-D display way turned off via the power button, and physically unpowered using the switch on the monitor's back.
Since the display is present and listed as powered on, I get some applications that open on it by default. The cursor can also move over to the unpowered display, and I can move windows and workplaces between the two displays.
Before you launch sway, what's the output of drm_info | grep 'Status: c' -C 5?
Your log reports that wlr sees a valid connection coming from its backend, libdrm.
Sway Version:
Debug Log:
Configuration File:
Description:
swaymsg -t get_outputs
.For this reproduction, and for the debug log seen above, the DVI-D display way turned off via the power button, and physically unpowered using the switch on the monitor's back.
Since the display is present and listed as powered on, I get some applications that open on it by default. The cursor can also move over to the unpowered display, and I can move windows and workplaces between the two displays.
swaymsg -t get_outputs
glxinfo -B
The text was updated successfully, but these errors were encountered: