CANOPY-SYS-MIB.mib

   CANOPY-SYS-MIB DEFINITIONS ::= BEGIN
 
   IMPORTS
      IpAddress, Counter, Gauge, TimeTicks, NetworkAddress, enterprises
         FROM RFC1155-SMI
      OBJECT-TYPE
         FROM RFC-1212
      DisplayString, PhysAddress
         FROM SNMPv2-TC
      NOTIFICATION-TYPE
         FROM SNMPv2-SMI;
 
   -- Define the Motorola Canopy object identifier
   motorola           OBJECT IDENTIFIER ::= { enterprises 17713 }
 
   -- Groups in motorola 
   p2p                OBJECT IDENTIFIER ::= { motorola 1 }
   p2mp               OBJECT IDENTIFIER ::= { motorola 2 }
 
   -- Groups in p2p
   configuration      OBJECT IDENTIFIER ::= { p2p 5 }
   licence            OBJECT IDENTIFIER ::= { p2p 8 }
   mgmt               OBJECT IDENTIFIER ::= { p2p 9 }
   phyControl         OBJECT IDENTIFIER ::= { p2p 10 }
   phyStatus          OBJECT IDENTIFIER ::= { p2p 12 }
   reset              OBJECT IDENTIFIER ::= { p2p 18 }
   versions           OBJECT IDENTIFIER ::= { p2p 19 }
   pubStats           OBJECT IDENTIFIER ::= { p2p 20 }
   encryption         OBJECT IDENTIFIER ::= { p2p 22 }
   p2pTraps           OBJECT IDENTIFIER ::= { p2p 99 }
 
   -- Configuration group attribute definitions 
   --
   iPAddress OBJECT-TYPE
      SYNTAX IpAddress
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Internet protocol (IP) address. This address is used by 
             the family of Internet protocols to uniquely this 
             identify the unit on a network"  
      ::= { configuration 1 } 
 
   subnetMask OBJECT-TYPE
      SYNTAX IpAddress
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "A subnet allows the flow of network traffic between 
             hosts to be segregated based on a network 
             configuration. By organizing hosts into 
             logical groups, subnetting can improve network 
             security and performance."  
      ::= { configuration 2 } 
 
   gatewayIPAddress OBJECT-TYPE
      SYNTAX IpAddress
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "The IP address of a computer on the current network that 
             is currently acting as a network gateway. A gateway 
             acts as an entrance / exit to packets from / to 
             other networks."  
      ::= { configuration 3 } 
 
   targetMACAddress OBJECT-TYPE
      SYNTAX OCTET STRING (SIZE(6))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "MAC address of the PTP wireless unit forming the other 
             end of the PTP link"  
      ::= { configuration 4 } 
 
   masterSlaveMode OBJECT-TYPE
      SYNTAX INTEGER {
                       master(0),
                       slave(1)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "The PTP wireless link operates using a master and slave 
             relationship."  
      ::= { configuration 5 } 
 
   maximumTransmitPower OBJECT-TYPE
      SYNTAX INTEGER (-15..27)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Maximum transmit power the wireless unit is permitted to 
             use when establishing and maintaining the wireless 
             link"  
      ::= { configuration 6 } 
 
   -- Licence group attribute definitions 
   --
   regionCode OBJECT-TYPE
      SYNTAX INTEGER (0..31)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "The region code prohibits the wireless unit from 
             operating outside the regulated limits"  
      ::= { licence 1 } 
 
   productVariant OBJECT-TYPE
      SYNTAX INTEGER {
                       motorola-canopy-60mbps-backhaul(0),
                       motorola-canopy-60mbps-backhaul(1),
                       motorola-canopy-60mbps-backhaul(2),
                       motorola-canopy-30mbps-backhaul(3),
                       spare-1(4),
                       spare-2(5),
                       spare-3(6),
                       spare-4(7),
                       spare-5(8),
                       spare-6(9),
                       spare-7(10),
                       motorola-canopy-150mbps-backhaul(11),
                       motorola-canopy-300mbps-backhaul(12)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "The product variant"  
      ::= { licence 2 } 
 
   productName OBJECT-TYPE
      SYNTAX DisplayString (SIZE(0..255))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Name of the product variant"  
      ::= { licence 3 } 
 
   ethernetFibreSupport OBJECT-TYPE
      SYNTAX INTEGER (0..1)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "null"  
      ::= { licence 4 } 
 
   frequencyVariant OBJECT-TYPE
      SYNTAX INTEGER {
                       freq-5800-mhz(0),
                       freq-5400-mhz(1)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Frequency variant of the wireless unit"  
      ::= { licence 5 } 
 
   -- Mgmt group attribute definitions 
   --
   targetRange OBJECT-TYPE
      SYNTAX INTEGER (0..2000)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Initial target range used in installation +/-1, 
             expressed in tenths of a kilometer. When 
             Auto-Ranging this must be set to 0"  
      ::= { mgmt 1 } 
 
   rangingMode OBJECT-TYPE
      SYNTAX INTEGER {
                       auto-0-40-km(0),
                       auto-0-100-km(1),
                       auto-0-200-km(2),
                       target-range(3)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Type of ranging to use during installation, either 
             Auto-Ranging or use a selectable Target 
             Range"  
      ::= { mgmt 2 } 
 
   -- PhyControl group attribute definitions 
   --
   asymmetricTDD OBJECT-TYPE
      SYNTAX INTEGER {
                       symmetric-data-rate-1-to-1(0),
                       asymmetric-data-rate-2-to-1(1)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Control TDD Structure"  
      ::= { phyControl 1 } 
 
   -- PhyStatus group attribute definitions 
   --
   receivePower OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Receive power expressed in tenths of a dBm"  
      ::= { phyStatus 1 } 
 
   vectorError OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "The vector error measurement compares the received 
             signal's IQ modulation characteristics to an 
             ideal signal to determine the composite error 
             vector magnitude. The value represented by this 
             attribute is the average vector error over the 
             previous second expressed in tenths of a dB"  
      ::= { phyStatus 2 } 
 
   transmitPower OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Transmit power expressed in tenths of a dBm"  
      ::= { phyStatus 3 } 
 
   range OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Distance between the two peer wireless units expressed 
             in tenths of a kilometer"  
      ::= { phyStatus 4 } 
 
   linkLoss OBJECT-TYPE
      SYNTAX INTEGER (-500..500)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "The wireless link loss expressed in tenths of a dB"  
      ::= { phyStatus 5 } 
 
   receiveChannel OBJECT-TYPE
      SYNTAX INTEGER (0..31)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Current active receive channel"  
      ::= { phyStatus 6 } 
 
   transmitChannel OBJECT-TYPE
      SYNTAX INTEGER (0..31)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Current active transmit channel"  
      ::= { phyStatus 7 } 
 
   receiveModulationMode OBJECT-TYPE
      SYNTAX INTEGER {
                       mod-acquisition(0),
                       mod-bpsk-0-63(1),
                       mod-qpsk-0-63-single(2),
                       mod-transient-1(3),
                       mod-qpsk-0-87-single(4),
                       mod-transient-2(5),
                       mod-16qam-0-63-single-a(6),
                       mod-transient-3(7),
                       mod-16qam-0-87-single(8),
                       mod-transient-5(9),
                       mod-64qam-0-75-single(10),
                       mod-transient-5(11),
                       mod-64qam-0-92-single(12),
                       mod-transient-6(13),
                       mod-256qam-0-81-single(14),
                       mod-16qam-0-63-single-b(15),
                       mod-16qam-0-63-dual(16),
                       mod-transient-7(17),
                       mod-16qam-0-87-dual(18),
                       mod-transient-8(19),
                       mod-64qam-0-75-dual(20),
                       mod-transient-9(21),
                       mod-64qam-0-92-dual(22),
                       mod-transient-10(23),
                       mod-256qam-0-81-dual(24)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Current active receive modulation mode"  
      ::= { phyStatus 8 } 
 
   transmitModulationMode OBJECT-TYPE
      SYNTAX INTEGER {
                       mod-acquisition(0),
                       mod-bpsk-0-63(1),
                       mod-qpsk-0-63-single(2),
                       mod-transient-1(3),
                       mod-qpsk-0-87-single(4),
                       mod-transient-2(5),
                       mod-16qam-0-63-single-a(6),
                       mod-transient-3(7),
                       mod-16qam-0-87-single(8),
                       mod-transient-5(9),
                       mod-64qam-0-75-single(10),
                       mod-transient-5(11),
                       mod-64qam-0-92-single(12),
                       mod-transient-6(13),
                       mod-256qam-0-81-single(14),
                       mod-16qam-0-63-single-b(15),
                       mod-16qam-0-63-dual(16),
                       mod-transient-7(17),
                       mod-16qam-0-87-dual(18),
                       mod-transient-8(19),
                       mod-64qam-0-75-dual(20),
                       mod-transient-9(21),
                       mod-64qam-0-92-dual(22),
                       mod-transient-10(23),
                       mod-256qam-0-81-dual(24)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Current active transmit modulation mode"  
      ::= { phyStatus 9 } 
 
   receiveFreq OBJECT-TYPE
      SYNTAX INTEGER (0..5875)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Current receive frequency expressed in MHz"  
      ::= { phyStatus 11 } 
 
   transmitFreq OBJECT-TYPE
      SYNTAX INTEGER (0..5875)
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Current transmit frequency expressed in MHz"  
      ::= { phyStatus 12 } 
 
   signalStrengthRatio OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Signal strength ratio (Vertical / Horizontal) expressed 
             in tenths of a dB"  
      ::= { phyStatus 13 } 
 
   -- Reset group attribute definitions 
   --
   systemReset OBJECT-TYPE
      SYNTAX INTEGER {
                       running(0),
                       console-reboot(1)
                     }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
             "Setting this attribute to '1' will cause a system 
             reboot"  
      ::= { reset 1 } 
 
   -- Versions group attribute definitions 
   --
   softwareVersion OBJECT-TYPE
      SYNTAX DisplayString (SIZE(0..255))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Current software version"  
      ::= { versions 1 } 
 
   hardwareVersion OBJECT-TYPE
      SYNTAX DisplayString (SIZE(0..255))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Hardware platform version."  
      ::= { versions 2 } 
 
   secondarySoftwareVersion OBJECT-TYPE
      SYNTAX DisplayString (SIZE(0..255))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Secondary software version, used when the primary 
             software image is invalid or erased"  
      ::= { versions 3 } 
 
   bootVersion OBJECT-TYPE
      SYNTAX DisplayString (SIZE(0..255))
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Boot code sofwtare version"  
      ::= { versions 4 } 
 
   -- PubStats group attribute definitions 
   --
   receiveDataRate OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Average data rate over the last one second interval 
             expressed in kbps"  
      ::= { pubStats 1 } 
 
   transmitDataRate OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Average data rate over the last one second interval 
             expressed in kbps"  
      ::= { pubStats 2 } 
 
   aggregateDataRate OBJECT-TYPE
      SYNTAX INTEGER
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "Average data rate over the last one second interval 
             (kbps)."  
      ::= { pubStats 3 } 
 
   -- Encryption group attribute definitions 
   --
   encryptionAlgorithm OBJECT-TYPE
      SYNTAX INTEGER {
                       none(0),
                       aes-rijndael(1)
                     }
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
             "The Encryption Algorithm used by the wireless link.nnYou 
             should be aware that enabling encryption results 
             in a reduction in available data bandwidthnnN.B. The 
             same Encryption Algorithm must be configured at BOTH 
             ends of the link for it to function correctly."  
      ::= { encryption 1 } 
 
   -- Enterprise NOTIFICATION definitions
   --
   dfsChannelChangeTrap NOTIFICATION-TYPE
      OBJECTS { receiveChannel }
      STATUS current
      DESCRIPTION "DFS channel change event"
      ::= { p2pTraps 1 }

   dfsImpulsiveInterferenceDetectedTrap NOTIFICATION-TYPE
      OBJECTS { receiveChannel }
      STATUS current
      DESCRIPTION "DFS impulsive interference detected event"
      ::= { p2pTraps 2 }
   END