Correct MCP9600 temperature sensor simulation #40436
Triggered via pull request
October 6, 2024 01:45
peterbarker
Status
Success
Total duration
5h 59m 26s
Artifacts
8
test_sitl_copter.yml
on: pull_request
Matrix: build
build-gcc-heli
4m 3s
Matrix: autotest
Matrix: autotest-heli
Annotations
4 errors and 67 warnings
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6034
vehicle_test_suite.NotAchievedException: Detected motor peak at 127.800119Hz, throttle 36.000000%, 7.133193dB
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6530
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6507, in test_gyro_fft_harmonic
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6034
vehicle_test_suite.NotAchievedException: Detected motor peak at 127.800119Hz, throttle 36.000000%, 7.133193dB
|
|
autotest (sitltest-copter-tests2b)
"GyroFFTContinuousAveraging (Use dynamic harmonic notch with FFT averaging to control motor noise
|
|
build (base)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build-gcc-heli
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
build (clang)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests1a)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests1a)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1a)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1a)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1a)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1a)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1a)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1a)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1a)
Failed to create link: test.ArduCopter/logs/2024-10-06/flight1/flight.tlog => /tmp/buildlogs/ArduCopter-test.tlog, will copy tlog manually to target location
|
|
autotest (sitltest-copter-tests1a)
Failed to create link: test.ArduCopter/logs/2024-10-06/flight2/flight.tlog => /tmp/buildlogs/ArduCopter-test.tlog, will copy tlog manually to target location
|
|
autotest-heli (sitltest-heli)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests1b)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests1b)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1b)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1b)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1b)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1b)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1b)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1b)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1b)
Failed to create link: test.ArduCopter/logs/2024-10-06/flight1/flight.tlog => /tmp/buildlogs/ArduCopter-test.tlog, will copy tlog manually to target location
|
|
autotest (sitltest-copter-tests1d)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests1d)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1d)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1d)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1d)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1d)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1d)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1d)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1e)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests1e)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1e)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1e)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1e)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1e)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1e)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1e)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2a)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests2a)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests2a)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests2a)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests2a)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests2a)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests2a)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests2a)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2a)
Failed to create link: test.ArduCopter/logs/2024-10-06/flight1/flight.tlog => /tmp/buildlogs/ArduCopter-test.tlog, will copy tlog manually to target location
|
|
autotest (sitltest-copter-tests1c)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests1c)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1c)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1c)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1c)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1c)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests1c)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests1c)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2b)
The following actions use a deprecated Node.js version and will be forced to run on node20: actions/cache/restore@v3. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
autotest (sitltest-copter-tests2b)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests2b)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests2b)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests2b)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests2b)
The directory '/github/home/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag.
|
|
autotest (sitltest-copter-tests2b)
Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
|
|
autotest (sitltest-copter-tests2b)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2b)
Failed to create link: test.ArduCopter/logs/2024-10-06/flight1/flight.tlog => /tmp/buildlogs/ArduCopter-test.tlog, will copy tlog manually to target location
|
|
autotest (sitltest-copter-tests2b)
Failed to create link: test.ArduCopter/logs/2024-10-06/flight2/flight.tlog => /tmp/buildlogs/ArduCopter-test.tlog, will copy tlog manually to target location
|
|
autotest (sitltest-copter-tests2b)
Failed to create link: test.ArduCopter/logs/2024-10-06/flight3/flight.tlog => /tmp/buildlogs/ArduCopter-test.tlog, will copy tlog manually to target location
|
Artifacts
Produced during runtime
| Name | Size | |
|---|---|---|
|
BIN-sitltest-copter-tests1a
|
28 MB |
|
|
BIN-sitltest-copter-tests1b
|
25.4 MB |
|
|
BIN-sitltest-copter-tests1c
|
38.6 MB |
|
|
BIN-sitltest-copter-tests1d
|
46.2 MB |
|
|
BIN-sitltest-copter-tests1e
|
36.7 MB |
|
|
BIN-sitltest-copter-tests2a
|
20.8 MB |
|
|
BIN-sitltest-copter-tests2b
|
192 MB |
|
|
BIN-sitltest-heli
|
53.5 MB |
|