This PCB provides control of eight MOSFET outputs. These can be controlled through an Adafruit Feather HUZZAH32 microcontroller. It is a two-layer PCB and all parts can be handsoldered in case that costs are a concern.
This board was designed using KiCad 6.0.
The board requires the following parts. All of them should be easy to handsolder:
| Part | Quantity | Description |
|---|---|---|
| Feather HUZZAH32 | 1 | ESP32 Microcontroller |
| Phoenix MPT-0,5-2-2.54 | 8 | 2-pin Terminalblock |
| IRLR024N DPAK MOSFET | 8 | N-Channel MOSFET (55V 17A) |
| 0805 Resistor 470 Ohm | 8 | Generic Resistor |
This work is licensed under a Creative Commons Attribution 4.0 International License.
