bump project version; prune authors

INSTALL.md

@@ -1,22 +1,24 @@
 # Install -- overview
 
-Elf-simulations is currently supported only for Python 3.10.
+All `elf-simulations` packages should be accessed from Python 3.10.
+The following outlines our recommended install workflow, although alternatives are listed below.
 
-## 1. Install Pyenv
-
-Follow [Pyenv install instructions](https://github.com/pyenv/pyenv#installation).
-
-## 2. Clone Elf-simulations repo
+## 1. Clone the `elf-simulations` repo
 
 Clone the repo into a <repo_location> of your choice.
 
 ```bash
-git clone https://github.com/delvtech/elf-simulations.git <repo_location>
+git clone git@github.com:delvtech/elf-simulations.git <repo_location>
 ```
 
-## 3. Set up virtual environment
+## 2. Install Pyenv
+
+Follow [Pyenv install instructions](https://github.com/pyenv/pyenv#installation).
+
+
+## 3. Set up a virtual environment
 
-You can use any environment, but we recommend [venv](https://docs.python.org/3/library/venv.html), which is part of the standard Python library.
+You can use any environment; we use [venv](https://docs.python.org/3/library/venv.html):
 
 ```bash
 cd <repo_location>
@@ -26,7 +28,7 @@ python -m venv .venv
 source .venv/bin/activate
 ```
 
-## 4. Install Elf-simulations
+## 4. Install `elf-simulations` packages and requirements
 
 All of the elf-simulations packages can be installed from `requirements.txt`:
 
@@ -43,44 +45,50 @@ python -m pip install --upgrade -r requirements-dev.txt
 
 Finally, you can test that everything is working by calling: `python -m pytest .`
 
-## Working with smart contracts (optional)
+# Alternate install paths
 
-We run tests and offer utilities that depend on executing bytecode compiled from Hyperdrive solidity contracts. This is not required to use elfpy.
+The default installation directions above should automatically install all local sub-packages, and should be sufficient for development.
+We also support these installation options:
 
-NOTE: The Hyperdrive solidity implementation is currently under security review, and thus is not available publicly.
-The following instructions will not work for anyone who is not a member of Delv.
+## Installing each subpackage independently
 
-### 1. Set up smart contracts
+After you have cloned the repository you can install each package independently.
+For example:
 
-Clone the hyperdrive repo, then create a [sym link](https://en.wikipedia.org/wiki/Symbolic_link#POSIX_and_Unix-like_operating_systems) at `hyperdrive_solidity/` pointing to the repo location.
+```bash
+python -m pip install --upgrade lib/agent0[with-dependencies]
+```
+
+Internally, the above installation calls
 
 ```bash
-git clone git@github.com:delvtech/hyperdrive.git ../hyperdrive
-ln -s ../hyperdrive hyperdrive_solidity
+pip install agent0[base] # Install with base packages only (this is what's called in requirements.txt)
+pip install agent0[lateral] # Installs dependent sub-packages from git (e.g., ethpy)
 ```
 
-### 2. Install Hyperdrive
+# Working with smart contracts
 
-Complete the steps in Hyperdrive's [Pre-requisites](https://github.com/delvtech/hyperdrive#pre-requisites) and [Build](https://github.com/delvtech/hyperdrive#build) sections.
+We run tests and offer utilities that depend on executing bytecode compiled from Hyperdrive solidity contracts. This is not required to use elfpy.
 
-## Notes
+NOTE: The Hyperdrive solidity implementation is currently under security review, and thus is not available publicly.
+The following instructions will not work for anyone who is not a member of Delv.
 
-The default installation directions above should automatically install all local sub-packages, and should be sufficient for development.
+## 1. Set up smart contracts
 
-We also support installing each subpackage independently. For example:
+Clone the hyperdrive repo, then create a [sym link](https://en.wikipedia.org/wiki/Symbolic_link#POSIX_and_Unix-like_operating_systems) at `hyperdrive_solidity/` pointing to the repo location.
 
 ```bash
-python -m pip install --upgrade lib/agent0[with-dependencies]
+git clone git@github.com:delvtech/hyperdrive.git ../hyperdrive
+ln -s ../hyperdrive hyperdrive_solidity
 ```
 
-Internally, the above installation calls
+## 2. Install Hyperdrive
 
-```bash
-pip install agent0[base] # Install with base packages only (this is what's called in requirements.txt)
-pip install agent0[lateral] # Installs dependent sub-packages from git (e.g., ethpy)
-```
+Complete the steps in Hyperdrive's [Pre-requisites](https://github.com/delvtech/hyperdrive#pre-requisites) and [Build](https://github.com/delvtech/hyperdrive#build) sections.
+
+# Additional useful applications
 
-You can test against a local testnet node using [Anvil](<[url](https://book.getfoundry.sh/reference/anvil/)>) with `anvil`.
+You can test against a local testnet node using [Anvil](https://book.getfoundry.sh/reference/anvil/) with `anvil`.
 
 We use [Docker](docs.docker.com/get-docker) for building images. Tests also use docker to launch a local postgres server.
 If there are Docker issues when running tests, ensure "Allow the default Docker socket to be used" is set under Advanced settings (typically when running

pyproject.toml

@@ -1,20 +1,18 @@
 [project]
 # TODO test this with docker
 name = "elf-simulations"
-version = "0.5.0"
+version = "0.6.0"
+# Authors are the current, primary stuards of the repo
+# contributors can be found on github
 authors = [
     { name = "Dylan Paiton", email = "dylan@delv.tech" },
     { name = "Mihai Cosma", email = "mihai@delv.tech" },
-    { name = "Jonny Rhea", email = "jonny@delv.tech" },
     { name = "Matthew Brown", email = "matt@delv.tech" },
-    { name = "Alex Towle", email = "alex@delv.tech" },
     { name = "Sheng Lundquist", email = "sheng@delv.tech" },
-    { name = "Patrick Morris", email = "patrick@delv.tech" },
+    { name = "Jonny Rhea", email = "jonny@delv.tech" },
+    { name = "Alex Towle", email = "alex@delv.tech" },
     { name = "Giovanni Effio", email = "mazygio@delv.tech" },
     { name = "Ryan Goree", email = "ryan@delv.tech" },
-    { name = "Will Villanueva", email = "will@delv.tech" },
-    { name = "Jacob Arruda", email = "jacob@delv.tech" },
-    { name = "Violet Vienhage", email = "violet@delv.tech" },
 ]