TETRIS and SNAKE on STM32F429 Discovery Board.
This is a small group project that I had in the Embedded System Design class. There're still some flaws in it but it works.
 |
 |
|---|---|
| (TETRIS) | (SNAKE) |
Read carefully the instructions below if you want to play the games on the board.
-
First, you need to copy all the directories in this repository to your project's root folder (I used STM32CubeIDE 1.3.0).
-
You might want to configure your IDE to include the
Drivers/BSPdirectory. -
Then plug the board in, press Launch and let the IDE do its jobs.
Note: Use the USER button (the blue one on the board) to switch between two games.
You will need a breadboard, four buttons, four 1 KOhm resistors, wires to connect.
Connect the button with the pull-down resistor configuration (I don't know how to describe this but you understand, right? If you don't, you could try googling for What the f*ck is pull-down (or pull-up) resistor and why do I have to use it?), do this for all four buttons.
(terrible wiring, I know)
Then connect the UP, DOWN, LEFT, RIGHT buttons to the PB12, PB13, PC8, PC9 pins of the board, respectively and you're good to go.