Skip to content

A modified DAPLink firmware (from JiXin) for STM32F103C6T6

Notifications You must be signed in to change notification settings

m24h/DAPLINK_C6T6

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

4 Commits
 
 
 
 
 
 

Repository files navigation

Modified from a modified copy of JiXin DAP-Link source codes, to fit STM32F103C6T6, which has only 32kB ROM and 10kB RAM. There's only a HID interface for debug and a CDC serial port for COM-like usage. HSE of STM32 is a 8MHz oscillator oscillator. The hardware GPIO pins (which can be modifed in file "DAP_config.h"): A9: serial TX A10: serial RX A2: SWDIO A4: SWCLK A6: nRESET B8: Connected LED B12: Target Running LED

Important: this is a Keil MDK5 project, but a compiler version 5 (ARMCC) is needed.

---------------------------- following is from original author -------------------------

本工程从“技新”开源的DAPLINK修改来。 修改 by:rush 1,解决了原工程缺文件无法编译问题。测试使用MDK474编译.由于某个文件RTL.h戳中了keil的G点,你需要注册机给keil注册下RTOS的功能! 2,原工程居然想当然去修改了设备名字!!!!导致了很多版本MDK无法识别!! 3,原工程注释掉部分描述符,不知道是不是复合设备不兼容他们的win7,总之这导致了在win10下复合设备不识别(看到只有串口没有HID) 4,原工程USBlib使用lib,但是提供了一份源码,为了完全开源我们改用源码编译,其中部分inline导致无法编译,已去除。 5,那个USBlib库不兼容GD等国产单片机,请老实花钱购买正常STM32芯片。 6,电路图就是常见的老古董STLINK2.0,还能刷JLINK OB的那种。我晶振是12M,用8M自行修改。

About

A modified DAPLink firmware (from JiXin) for STM32F103C6T6

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 98.3%
  • HTML 1.2%
  • Other 0.5%