Skip to content

mkdf/standardhub

Repository files navigation

MKDF Standard Hub

Umbrella project to test the MKDF modules on a plain project

ZendSkeletonApplication

Introduction

This is a skeleton application using the Zend Framework MVC layer and module systems. This application is meant to be used as a starting place for those looking to get their feet wet with Zend Framework.

Installation using Composer

The easiest way to create a new Zend Framework project is to use Composer. If you don't have it already installed, then please install as per the documentation.

To create your new Zend Framework project:

$ composer create-project -sdev zendframework/skeleton-application path/to/install

Once installed, you can test it out immediately using PHP's built-in web server:

$ cd path/to/install
$ php -S 0.0.0.0:8080 -t public
# OR use the composer alias:
$ composer run --timeout 0 serve

This will start the cli-server on port 8080, and bind it to all network interfaces. You can then visit the site at http://localhost:8080/

  • which will bring up Zend Framework welcome page.

Note: The built-in CLI server is for development only.

Development mode

The skeleton ships with zf-development-mode by default, and provides three aliases for consuming the script it ships with:

$ composer development-enable  # enable development mode
$ composer development-disable # disable development mode
$ composer development-status  # whether or not development mode is enabled

You may provide development-only modules and bootstrap-level configuration in config/development.config.php.dist, and development-only application configuration in config/autoload/development.local.php.dist. Enabling development mode will copy these files to versions removing the .dist suffix, while disabling development mode will remove those copies.

Development mode is automatically enabled as part of the skeleton installation process. After making changes to one of the above-mentioned .dist configuration files you will either need to disable then enable development mode for the changes to take effect, or manually make matching updates to the .dist-less copies of those files.

Running Unit Tests

To run the supplied skeleton unit tests, you need to do one of the following:

  • During initial project creation, select to install the MVC testing support.

  • After initial project creation, install zend-test:

    $ composer require --dev zendframework/zend-test

Once testing support is present, you can run the tests using:

$ ./vendor/bin/phpunit

If you need to make local modifications for the PHPUnit test setup, copy phpunit.xml.dist to phpunit.xml and edit the new file; the latter has precedence over the former when running tests, and is ignored by version control. (If you want to make the modifications permanent, edit the phpunit.xml.dist file.)

Using Vagrant

This skeleton includes a Vagrantfile based on ubuntu 16.04 (bento box) with configured Apache2 and PHP 7.0. Start it up using:

$ vagrant up

Once built, you can also run composer within the box. For example, the following will install dependencies:

$ vagrant ssh -c 'composer install'

While this will update them:

$ vagrant ssh -c 'composer update'

While running, Vagrant maps your host port 8080 to port 80 on the virtual machine; you can visit the site at http://localhost:8080/

Vagrant and VirtualBox

The vagrant image is based on ubuntu/xenial64. If you are using VirtualBox as a provider, you will need:

  • Vagrant 1.8.5 or later
  • VirtualBox 5.0.26 or later

For vagrant documentation, please refer to vagrantup.com

Using docker-compose

This skeleton provides a docker-compose.yml for use with docker-compose; it uses the Dockerfile provided as its base. Build and start the image using:

$ docker-compose up -d --build

At this point, you can visit http://localhost:8080 to see the site running.

You can also run composer from the image. The container environment is named "zf", so you will pass that value to docker-compose run:

$ docker-compose run zf composer install

Web server setup

Apache setup

To setup apache, setup a virtual host to point to the public/ directory of the project and you should be ready to go! It should look something like below:

<VirtualHost *:80>
    ServerName zfapp.localhost
    DocumentRoot /path/to/zfapp/public
    <Directory /path/to/zfapp/public>
        DirectoryIndex index.php
        AllowOverride All
        Order allow,deny
        Allow from all
        <IfModule mod_authz_core.c>
        Require all granted
        </IfModule>
    </Directory>
</VirtualHost>

Nginx setup

To setup nginx, open your /path/to/nginx/nginx.conf and add an include directive below into http block if it does not already exist:

http {
    # ...
    include sites-enabled/*.conf;
}

Create a virtual host configuration file for your project under /path/to/nginx/sites-enabled/zfapp.localhost.conf it should look something like below:

server {
    listen       80;
    server_name  zfapp.localhost;
    root         /path/to/zfapp/public;

    location / {
        index index.php;
        try_files $uri $uri/ @php;
    }

    location @php {
        # Pass the PHP requests to FastCGI server (php-fpm) on 127.0.0.1:9000
        fastcgi_pass   127.0.0.1:9000;
        fastcgi_param  SCRIPT_FILENAME /path/to/zfapp/public/index.php;
        include fastcgi_params;
    }
}

Restart the nginx, now you should be ready to go!

QA Tools

The skeleton does not come with any QA tooling by default, but does ship with configuration for each of:

Additionally, it comes with some basic tests for the shipped Application\Controller\IndexController.

If you want to add these QA tools, execute the following:

$ composer require --dev phpunit/phpunit squizlabs/php_codesniffer zendframework/zend-test

We provide aliases for each of these tools in the Composer configuration:

# Run CS checks:
$ composer cs-check
# Fix CS errors:
$ composer cs-fix
# Run PHPUnit tests:
$ composer test

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published