Philips Hue (ZigBee)

Control your Philips Hue devices with Homey using ZigBee!

!!! Warning !!!

You will need a dimmer switch to correctly un-pair/reset lamps from the Hue bridge or to reset lamps in case something goes wrong during pairing. If you dont have one get one first before continuing!

Deleting a lamp from the Hue app or resetting your bridge will NOT work to un-pair/reset your lamps correctly!

Unpairing lights from the Hue bridge

You will have to un-pair your lamp from the Hue bridge before you can pair it with Homey.

A Hue dimmer switch can be used to un-pair/reset a light using TouchLink.

First pair the lamp to the dimmer-switch:

• Hold your dimmer switch in close proximity to the lamp and long press (+10 seconds) the on-button.
• Keep holding the button while the lamp is blinking.
• The lamp is now paired to the dimmer-switch

Now un-pair the light from the dimmer-switch:

• Hold your dimmer switch in close proximity to the lamp and long press (+10 seconds) both the on-button and the off-button at the same time.
• Keep holding the buttons while the lamp is blinking.
• Your lamp is now un-paired and ready to be included.

Adding devices to Homey

I recommend adding devices using Homey \ ZigBee instead of selecting the device to add from the Hue app. That way the correct device will be selected automatically based on the interview.

List of supported devices

• white lamp
• ambiance lamp
• ambiance spot
• ambiance ceiling
• color lamp
• color spot
• go
• bloom
• dimmer switch

Changelog

0.0.1

• Philips Hue (ZigBee) based on the Osram Lightify app