Skip to content

test-kitchen/kitchen-habitat

Repository files navigation

Gem Version CI

kitchen-habitat

A Test Kitchen Provisioner for Habitat

Requirements

Installation & Setup

You'll need the test-kitchen & kitchen-habitat gems installed in your system, along with kitchen-vagrant or some other suitable driver for test-kitchen.

Configuration Settings

  • hab_license: Habitat license acceptance type (for more information please read the chef license documentation).
  • hab_version: The version of habitat to be used in test kitchen.

Depot settings

  • depot_url
    • Target Habitat Depot to use to install packages.
    • Defaults to nil (which will use the default depot settings for the hab CLI from ~/.hab/etc/cli.toml).

Supervisor Settings

  • hab_sup_origin
    • Package identification for the supervisor to use.
    • Defaults to core, or, if hab_sup_artifact_name is supplied, the hab_sup_origin will be parsed from the filename of the hart file.
  • hab_sup_name
    • Name of the supervisor package
    • Defaults to hab-sup, or, if hab_sup_artifact_name is supplied, the hab_sup_name will be parsed from the filename of the hart file.
  • hab_sup_version
    • Version number of hab-sup to run
    • Defaults to nil, or, if hab_sup_artifact_name is supplied, the hab_sup_version will be parsed from the filename of the hart file.
  • hab_sup_release
    • Release of the hab-sup package to run
    • Defaults to nil, or, if hab_sup_artifact_name is supplied, the hab_sup_release will be parsed from the filename of the hart file.
  • hab_sup_artifact_name
    • Artifact package name for a custom supervisor to run
    • Used to upload and test a local supervisor.
    • Package should be located in the results_directory
    • Defaults to `nil
  • hab_sup_listen_http
    • Port for the supervisor's sidecar to listen on.
    • Defaults to nil
  • hab_sup_listen_gossip
    • Port for the supervisor's gossip communication
    • Defaults to nil
  • hab_sup_group
    • Service group for the supervisor to belong do.
    • Default is default
  • hab_sup_bind
    • Service group for the supervisor to bind to.
    • Default is []
  • hab_sup_peer
    • IP and port (e.g. 192.168.1.86:9010) of the supervisor of which to connect to join the ring.
    • Default is []
  • hab_sup_ring
    • Ring key name
    • Default is nil

Package Settings

  • artifact_name
    • Artifact package filename to install and run.
    • Used to upload and test a local artifact.
    • Package should be located in the results_directory
    • Example - core-jq-static-1.5-20170127185151-x86_64-linux.hart
    • Defaults to nil
  • results_directory
    • Directory (relative to the location of the .kitchen.yml) containing package artifacts (harts) to copy to the remote system
    • Defaults to checking the local directory for a results directory, then its parent (../results) and grandparent (../../results), which should accommodate most studio layouts.
  • package_origin
    • Origin for the package to run.
    • Defaults to core, or, if artifact_name is supplied, the package_origin will be parsed from the filename of the hart file.
  • package_name
    • Package name for the supervisor to run.
    • Defaults to the suite name or, if artifact_name is supplied, the package_name will be parsed from the filename of the hart file.
  • package_version
    • Package version of the package to be run.
    • Defaults to nil or if artifact_name is supplied, the package_version will be parsed from the filename of the hart file.
  • package_release
    • Package release of the package to be run.
    • Defaults to nil or if artifact_name is supplied, the package_release will be parsed from the filename of the hart file.
  • service_topology
    • The topology for the service to run in. Valid values are nil, standalone, leader
    • Defaults to nil which is standalone
  • service_update_strategy
    • Describes how package updates are to be applied. Valid values are nil, at-once, rolling.
    • Default is nil, which does not check for package updates.
  • config_directory
    • Directory containing a user.toml or/and a default.toml, hooks, and configuration files to be passed to the service under test.
    • Defaults to nil
  • override_package_config
    • Tell the supervisor to load the the configuration files and hooks from config_directory instead of what was packaged with the service. (Uses --config-from via the hab-sup CLI.)
  • user_toml_name
    • Name of the file to be used as the user.toml for the service under test.
    • Defaults to user.toml
  • install_latest_artifact
    • Choose to install latest artifact.
    • Must specify artifact_name or package_origin and package_name
    • package_version and package_release will be ignored
    • Defaults to false

EAS Application Dashboard Settings

  • event_stream_application
    • The name of your application.
    • Defaults to nil
  • event_stream_environment
    • The application environment for this supervisor.
    • Defaults to nil
  • event_stream_site
    • Describes the physical (for example, datacenter) or cloud-specific (for example, the AWS region) location where your services are deployed.
    • Defaults to nil
  • event_stream_url
    • The Chef Automate URL with port 4222 specified.
    • Defaults to nil
  • event_stream_token
    • Chef Automate Token
    • Defaults to nil

NOTE: All 5 EAS settings are required for it to report to Automate.

Examples

Run the core-redis package

driver:
  name: vagrant

provisioner:
  name: habitat
  hab_sup_origin: core
  hab_sup_name: sup
  package_origin: core
  package_name: redis

platforms:
  - name: ubuntu-16.04

suites:
  - name: default

Two node: elasticsearch and kibana

driver:
  name: docker

provisioner:
  name: habitat
  hab_sup_origin: core
  hab_sup_name: sup

platforms:
  - name: ubuntu-16.04

suites:
  - name: elasticsearch
    provisioner:
      package_origin: core
      package_name: elasticsearch
    driver:
      instance_name: elastic

  - name: kibana
    provisioner:
      package_origin: core
      package_name: kibana
      hab_sup_peer:
        - elastic
      hab_sup_bind:
        - elasticsearch:elasticsearch.default
    driver:
      instance_name: kibana
      links: elastic:elastic

EAS Application Dashboard Example

---
driver:
  name: azurerm

driver_config:
  subscription_id: <%= ENV['subscription_id'] %>
  location: <%= ENV['region'] %>
  machine_size: "Standard_DS2_v2"

verifier:
  name: inspec

provisioner:
  name: habitat
  hab_version: 'latest'
  hab_license: accept
  event_stream_application: Effortless
  event_stream_environment: stable
  event_stream_site: <%= ENV['region'] %>
  event_stream_url: automate.example.com:4222
  event_stream_token: <%= ENV['automate_token'] %>

platforms:
  - name: windows
    driver:
      image_urn: MicrosoftWindowsServer:WindowsServer:2019-Datacenter:latest
      vm_name: windows
    provisioner:
      package_origin: <%= ENV['package_orgin'] %>
      package_name: <%= ENV['package_name'] %>

suites:
  - name: default
    verifier:
      inspec_tests:
        - tests

Latest Artifact example

This example assumes you've already done a build via hab studio.

driver:
  name: vagrant
  customize:
    memory: 2048

verifier:
  name: inspec

provisioner:
  name: habitat
  hab_version: 'latest'
  hab_license: accept

platforms:
  - name: wildfly-local
    driver:
      box: bento/ubuntu-16.04
    provisioner:
      package_origin: jmassardo
      package_name: wildfly
      results_directory: results
      install_latest_artifact: true

suites:
  - name: default
    verifier:
      inspec_tests:
        - tests

Apply user.toml Example

This example assumes that you have a /configs/user.toml in your project directory.

driver:
  name: vagrant
  customize:
    memory: 2048

verifier:
  name: inspec

provisioner:
  name: habitat
  hab_version: 'latest'
  hab_license: accept

platforms:
  - name: wildfly
    driver:
      box: bento/ubuntu-16.04
    provisioner:
      package_origin: jmassardo
      package_name: wildfly
      channel: unstable
      config_directory: configs

suites:
  - name: default
    verifier:
      inspec_tests:
        - tests