bonding: use hwaddr of the slave rather than the master #19
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
When a bonded interface is brought up, any slaves included in the bond have their hardware address set to that of the bond master. Although this allows an interface to be brought up on start up, when the configuration file is imported into the booted system it prevents the bonded interface being successfully restarted. The fix involves obtaining the hardware address of the slaves before they are added to the bond and then using this value in the configuration file.
|
Just realised I forgot to include the bugzilla entry at the time as well: https://bugzilla.redhat.com/show_bug.cgi?id=1096954 Are there any test cases etc I need to run this against to make sure it's fine? I've tested in a few systems (all Fedora 20) that I have access to and it works as expected on those; fixing the issue I was having when bringing a bonded interface up during the initial boot process. |
|
pushed, thanks! |
|
No problem, thanks for looking it over and committing. Time to track down and figure out another one that's related to this one :) |
johannbg
added
ifcfg
runsisi
added a commit
to runsisi/dracut
that referenced
this pull request
Aug 6, 2022
in install_dependent_modules we use &path[kerneldirlen] as the key for inserting, let's do the same for checking. otherwise installing kernel module has circular dependency from a custom kernel module directory will cause infinite recursion and segfault. $ grep ipmi kbuilt/lib/modules/5.10.121/modules.dep kernel/drivers/char/ipmi/ipmi_msghandler.ko: kernel/drivers/char/ipmi/ipmi_devintf.ko: kernel/drivers/char/ipmi/ipmi_msghandler.ko $ grep ipmi kbuilt/lib/modules/5.10.121/modules.softdep softdep ipmi_msghandler post: ipmi_devintf $ ./dracut-install -D /tmp --kerneldir ~/working/kernel/linux-5.10.121/kbuilt/lib/modules/5.10.121 -m ipmi-devintf Segmentation fault (core dumped) (gdb) b install_dependent_modules Breakpoint 1 at 0x7db0: file src/install/dracut-install.c, line 1513. (gdb) bt #0 install_dependent_modules (modlist=0x0) at src/install/dracut-install.c:1513 dracutdevs#1 0x000055555555c027 in install_dependent_modules (modlist=modlist@entry=0x555555579e90) at src/install/dracut-install.c:1553 dracutdevs#2 0x000055555555bf1c in install_dependent_modules (modlist=0x5555555799d0) at src/install/dracut-install.c:1548 dracutdevs#3 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557a3f0) at src/install/dracut-install.c:1554 dracutdevs#4 0x000055555555bf1c in install_dependent_modules (modlist=0x555555579d60) at src/install/dracut-install.c:1548 dracutdevs#5 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557b170) at src/install/dracut-install.c:1554 dracutdevs#6 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557a0f0) at src/install/dracut-install.c:1548 dracutdevs#7 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555575320) at src/install/dracut-install.c:1554 dracutdevs#8 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557ab30) at src/install/dracut-install.c:1548 dracutdevs#9 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557dd60) at src/install/dracut-install.c:1554 dracutdevs#10 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557b640) at src/install/dracut-install.c:1548 dracutdevs#11 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557e0f0) at src/install/dracut-install.c:1554 dracutdevs#12 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557b9d0) at src/install/dracut-install.c:1548 dracutdevs#13 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555574340) at src/install/dracut-install.c:1554 dracutdevs#14 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557cf70) at src/install/dracut-install.c:1548 dracutdevs#15 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x5555555768d0) at src/install/dracut-install.c:1554 dracutdevs#16 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557d750) at src/install/dracut-install.c:1548 dracutdevs#17 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557e700) at src/install/dracut-install.c:1554 dracutdevs#18 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557de90) at src/install/dracut-install.c:1548 dracutdevs#19 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555581c90) at src/install/dracut-install.c:1554 dracutdevs#20 0x000055555555bf1c in install_dependent_modules (modlist=0x555555571e60) at src/install/dracut-install.c:1548 dracutdevs#21 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555556b620) at src/install/dracut-install.c:1554 dracutdevs#22 0x000055555555bf1c in install_dependent_modules (modlist=0x555555583000) at src/install/dracut-install.c:1548 dracutdevs#23 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555556b640) at src/install/dracut-install.c:1554 dracutdevs#24 0x000055555555bf1c in install_dependent_modules (modlist=0x555555571b40) at src/install/dracut-install.c:1548 dracutdevs#25 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555574100) at src/install/dracut-install.c:1554 dracutdevs#26 0x000055555555c4b0 in install_module (mod=mod@entry=0x555555573bc0) at src/install/dracut-install.c:1617 dracutdevs#27 0x000055555555c93d in install_modules (argc=argc@entry=1, argv=argv@entry=0x7fffffffd6e0) at src/install/dracut-install.c:1952 dracutdevs#28 0x000055555555862a in main (argc=<optimized out>, argv=0x7fffffffd6a8) at src/install/dracut-install.c:2090 Signed-off-by: runsisi <runsisi@hust.edu.cn>
johannbg
pushed a commit
that referenced
this pull request
Aug 15, 2022
in install_dependent_modules we use &path[kerneldirlen] as the key for inserting, let's do the same for checking. otherwise installing kernel module has circular dependency from a custom kernel module directory will cause infinite recursion and segfault. $ grep ipmi kbuilt/lib/modules/5.10.121/modules.dep kernel/drivers/char/ipmi/ipmi_msghandler.ko: kernel/drivers/char/ipmi/ipmi_devintf.ko: kernel/drivers/char/ipmi/ipmi_msghandler.ko $ grep ipmi kbuilt/lib/modules/5.10.121/modules.softdep softdep ipmi_msghandler post: ipmi_devintf $ ./dracut-install -D /tmp --kerneldir ~/working/kernel/linux-5.10.121/kbuilt/lib/modules/5.10.121 -m ipmi-devintf Segmentation fault (core dumped) (gdb) b install_dependent_modules Breakpoint 1 at 0x7db0: file src/install/dracut-install.c, line 1513. (gdb) bt #0 install_dependent_modules (modlist=0x0) at src/install/dracut-install.c:1513 #1 0x000055555555c027 in install_dependent_modules (modlist=modlist@entry=0x555555579e90) at src/install/dracut-install.c:1553 #2 0x000055555555bf1c in install_dependent_modules (modlist=0x5555555799d0) at src/install/dracut-install.c:1548 #3 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557a3f0) at src/install/dracut-install.c:1554 #4 0x000055555555bf1c in install_dependent_modules (modlist=0x555555579d60) at src/install/dracut-install.c:1548 #5 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557b170) at src/install/dracut-install.c:1554 #6 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557a0f0) at src/install/dracut-install.c:1548 #7 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555575320) at src/install/dracut-install.c:1554 #8 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557ab30) at src/install/dracut-install.c:1548 #9 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557dd60) at src/install/dracut-install.c:1554 #10 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557b640) at src/install/dracut-install.c:1548 #11 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557e0f0) at src/install/dracut-install.c:1554 #12 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557b9d0) at src/install/dracut-install.c:1548 #13 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555574340) at src/install/dracut-install.c:1554 #14 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557cf70) at src/install/dracut-install.c:1548 #15 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x5555555768d0) at src/install/dracut-install.c:1554 #16 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557d750) at src/install/dracut-install.c:1548 #17 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555557e700) at src/install/dracut-install.c:1554 #18 0x000055555555bf1c in install_dependent_modules (modlist=0x55555557de90) at src/install/dracut-install.c:1548 #19 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555581c90) at src/install/dracut-install.c:1554 #20 0x000055555555bf1c in install_dependent_modules (modlist=0x555555571e60) at src/install/dracut-install.c:1548 #21 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555556b620) at src/install/dracut-install.c:1554 #22 0x000055555555bf1c in install_dependent_modules (modlist=0x555555583000) at src/install/dracut-install.c:1548 #23 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x55555556b640) at src/install/dracut-install.c:1554 #24 0x000055555555bf1c in install_dependent_modules (modlist=0x555555571b40) at src/install/dracut-install.c:1548 #25 0x000055555555c034 in install_dependent_modules (modlist=modlist@entry=0x555555574100) at src/install/dracut-install.c:1554 #26 0x000055555555c4b0 in install_module (mod=mod@entry=0x555555573bc0) at src/install/dracut-install.c:1617 #27 0x000055555555c93d in install_modules (argc=argc@entry=1, argv=argv@entry=0x7fffffffd6e0) at src/install/dracut-install.c:1952 #28 0x000055555555862a in main (argc=<optimized out>, argv=0x7fffffffd6a8) at src/install/dracut-install.c:2090 Signed-off-by: runsisi <runsisi@hust.edu.cn>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
When a bonded interface is brought up, any slaves included in the bond
have their hardware address set to that of the bond master. Although
this allows an interface to be brought up on start up, when the
configuration file is imported into the booted system it prevents
the bonded interface being successfully restarted.
The fix involves obtaining the hardware address of the slaves before
they are added to the bond and then using this value in the
configuration file.